Member Since: 05 Dec 2009
Location: Canada
Posts: 30
All is good now. Strange.
Pat, any ETA on a Tranny ECU Flash? I'd love to update mine as it hasn't been plugged in at a Dealer since 2009 and i'm not about to set foot in the Ottawa LR/Jag Dealer anytime soon.
BTW, i'm in Ottawa if your looking for another Trojan Test Pilot.
Scotty2005 NAS SE Petrol V8
10th Aug 2014 3:31 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Hi Scotty
Contact us by e-mail for the transmsion firmware, we can provide it to you: GAPTeam AT gap-diagnostic.com
Ottawa? pretty close We are just on the outskirt of Montreal.
Member Since: 16 Feb 2013
Location: Ayrshire
Posts: 384
After switching mmy ipad off and back on I can get in now.
11th Aug 2014 9:55 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Hi Guys
For those who have been waiting, the time has finally come. We've now released V3.0 for regular non Bluetooth IIDTool's made for Discovery 3/LR3 and Range Rover Sport up to 2009. We will send an e-mail to each user on Monday but for now, you can have access to it using the updater software (may need to be updated depending on which version you are using).
The following new features are included in V3.0 for non Bluetooth IIDTool’s:
• Supports the new PC based interface
• Additional calibration functions (steering angle, transfer box)
• ECU Re-flashing (Bluetooth, Nav On Move, modified IPC Instrument Pack with FBH light fix all added)
• New VIN lock policy:
Standard diagnostic functions (free of charge on any L319 or L320 up to 2009)
• Fault read / clear
• Live values
• Control outputs
• Service / test functions
Enhanced diagnostic functions (one free VIN, extra VINs are available from your Britpart dealer at around 60 GBP):
• ECU Re-flash
• Component and system calibration (steering angle sensor calibration etc)
• Advanced functions including backup / restore, save profiles – vehicle system settings and
configurations are read and stored as a backup file for a restore function, various changes
to systems (e.g. suspension height) can be stored and changed quickly
The user manual is also available for downloading. We strongly suggest reading it before using this new version, especially if you want to perform the new re-flashes.
Member Since: 12 Jan 2009
Location: Eddleston
Posts: 858
Updated - Thanks
Will be out playing with it tonight .........There is no such thing as bad weather, only the wrong clothes.
8th Sep 2014 4:16 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Hi Guys
We've just released 2 new builds of firmware V3.0 for the IIDTool BT. The first one (release) now includes:
-The modified IPC firmware for earlier vehicles (clock on dash, no FBH light)
-Faster updating method for the IIDTool itself
The second one is a special build (1112) called Nav On Move. This firmware is used to enable destination entry while the vehicle is moving and cannot perform any diagnostic tasks. The process involve two consecutives reflashes of the Touchscreen and takes about 71 minutes. Please consult the IIDTool’s user manual for more details
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
We are just on the outskirt of Montreal.
