Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Thank you, methinks I'll do that wee mod
Thanks guys Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
11th Oct 2014 6:08 pm
mattlidster
Member Since: 30 Jul 2011
Location: Poole Dorset
Posts: 128
Yep its number 1, not sure if its possible to get them to come on when cornering as well?
11th Oct 2014 6:36 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
definitely no chance of number 2 I know for sure, unless your car has AFS from factory as a D4, if so why did it not have the corner lights would be my first question FFRR SC 4.2
Member Since: 08 Mar 2010
Location: Warwickshire
Posts: 1477
Well done that man!
Number 2 is what you get from cornering lamps fitted when you have AFS headlights and AFS headlights come with the cornering lamps in them anyway (in Europe not NAS).
Question is if you fit AFS lights to a non AFS car could you achieve number 2 and have the AFS working? I think that you could with an AFS ECU and a lot of new wires..........
11th Oct 2014 10:54 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
You can only do this on a D4 but you would have to have the patience of a saint to fit all the wiring etc.FFRR SC 4.2
Can anyone tell me where I can find these plugs that fit on to the bulb holders? I have had a look on various sites, but can't find them You only get one lap, make it count !!
29th Jun 2015 8:46 am
mattlidster
Member Since: 30 Jul 2011
Location: Poole Dorset
Posts: 128
Member Since: 16 Apr 2010
Location: Centurion RSA
Posts: 154
mattlidster wrote:
Pins in
Hi Matt
May I ask, how did you get this plug off to work the pins and wires through the light? It seems that the plug was fitted from the inside during assembly.
I am not asking how you unplugged it.... that part was easy... how did you get to the back of the plug on the light side?
Cheers
ChrisProud owner of an IIDTool
2010 Disco 4 TDV6 SE
R2D3 the 2007 Disco 3 TDV6 SE... gone now
Romulus [Defender 110 CSW Td5] will always be missed
Rofty [Defender 110 CSW Td5] first Td5 and start of motor electronics...
www.flickr.com/photos/the_steyns
You have to turn the pug inside the lamp unit and then use long nose pillars and a bright light to fit the pins in the correct holes, extra-long pin like fingers are useful !! You only get one lap, make it count !!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
