Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
tomsquad419 wrote:
It looks like the headlight has tabs all the way around it that the clear plastic lens goes around. Am I wrong?
Yes it does but that’s only so the factory can Aline them properly
The lens is bonded to the backDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
15th Nov 2018 8:20 pm
tomsquad419
Member Since: 07 Feb 2018
Location: Atlanta, GA
Posts: 100
Ah, I see. I would hate that that is whats stopping me from adding cornering lights. If anyone else has info please feel free to chime in.
Thanks,
15th Nov 2018 8:26 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
D3 ones put in oven for 8 mins at 80 deg c
U could try that and seeDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
15th Nov 2018 8:37 pm
tomsquad419
Member Since: 07 Feb 2018
Location: Atlanta, GA
Posts: 100
And does the housing just fall apart?
16th Nov 2018 2:25 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
No it softens the glue so it can be prized apartDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
16th Nov 2018 2:28 pm
tomsquad419
Member Since: 07 Feb 2018
Location: Atlanta, GA
Posts: 100
Any idea where I can get the part # for the cornering circuit board / LED? I am going to try and see if I can find and buy these separately first, and then attack the headlight.
Thanks,
16th Nov 2018 4:20 pm
maxiller
Member Since: 29 Dec 2018
Location: Moscow
Posts: 4
just did this mod to my MY10
and for those who wonder what to do with SDD here, here is the parameter that needs to be altered in CCF.
Click image to enlarge
7th Aug 2019 7:42 am
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
That setting will
Only allow them to work with the indicators
It needs a hcm fitted then will work off the steering angle censorDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
7th Aug 2019 8:06 am
maxiller
Member Since: 29 Dec 2018
Location: Moscow
Posts: 4
doh...
alright then, that's new
where should it be located/placed?
Is it LR045007?
7th Aug 2019 11:29 am
maxiller
Member Since: 29 Dec 2018
Location: Moscow
Posts: 4
I think I found it.
Does it work at all, without actual adaptive headlights?
7th Aug 2019 12:30 pm
tomsquad419
Member Since: 07 Feb 2018
Location: Atlanta, GA
Posts: 100
James1974 wrote:
That setting will
Only allow them to work with the indicators
It needs a hcm fitted then will work off the steering angle censor
Can this be done on the North American specs?
7th Aug 2019 2:03 pm
Bora20
Member Since: 13 Feb 2020
Location: Kamloops, BC
Posts: 1
Bringing this one back.
I contacted Simtek to purchase pins and seals for CON-466 listed one their website. Roughly $20 CAD shipped to Canada. I should have them in 7-10 days via Air Mail.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
