Member Since: 12 Feb 2013
Location: aberdeen
Posts: 214
keep us updated on what they are tinted windows
led sidelights
new fuel pump
disco 3 sticker
4x4 screen unlocked ( thanks bell autos)
bell autos egr blanking kit
halo fog day running lights
ffrr sat nav hack
gvif reverse camera
clear side indicators
alisport intercooler hoses
21st Mar 2016 10:22 am
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
Got codes - none the wiser !!
So after being abroad for a few weeks I finally got the codes read:
Suspension
C1A13
C1A36
C1A27
Handbraake
C1A00
U0122
U0155
U0101
After clearing all codes and doing a test drive only two codes showed
Suspension: C1A13
Handbrake: U0101
Mechanic suggested faults in n/s/f wheel arch as per threads below
I have removed the liner, but I cannot find these connector blocks at all ?
Can anyone direct me to them ?
Thanks
24th Apr 2016 4:32 pm
bear1009
Member Since: 12 Feb 2013
Location: aberdeen
Posts: 214
they are at the bottom rear of the front passenger side arch there are three plugs if you have the arch liner out you should see them tinted windows
led sidelights
new fuel pump
disco 3 sticker
4x4 screen unlocked ( thanks bell autos)
bell autos egr blanking kit
halo fog day running lights
ffrr sat nav hack
gvif reverse camera
clear side indicators
alisport intercooler hoses
24th Apr 2016 6:45 pm
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
Can't find them
I do not seem to have these connectors - very strange
26th Apr 2016 9:31 pm
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
here is a photo
26th Apr 2016 9:33 pm
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
I could not insert the photo - its in my gallery
26th Apr 2016 9:37 pm
WillyEckerslike
Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967
If yours is a MY2007 DR, then those connectors are not in the front wheel arch.
Try the 3 behind the rear NS wheel instead.
26th Apr 2016 9:52 pm
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
Yes, I am MY2007.
Many thanks, will look Thursday and post an update
26th Apr 2016 10:44 pm
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
OK - so I put the n/s/f back together and opened up the n/s/r arch and all looks in order
I cannot see any sign of corrosion of damage on any of the visible connectors
There are not three connector as in the post above
Take a look at my gallery to see what I found
Any suggestions welcomed
30th Apr 2016 3:23 pm
DR
Member Since: 24 Aug 2011
Location: Dublin
Posts: 16
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum