Member Since: 01 Mar 2024
Location: Wisbech
Posts: 71
Oil and filter change,
Fuel filter change,
MAP sensor cleaned - really must fit the DPF blanking plates!
Front half cleaned and first stage of underseal applied inside cavities and on chassis etc.
Tried to retrofit parking sensors and failed
17th Jul 2024 5:23 pm
Bird_2112
Member Since: 27 Aug 2020
Location: SWANSEA
Posts: 71
KevinD3.. Any link or description to match the advert? Thanks
17th Jul 2024 5:54 pm
Bird_2112
Member Since: 27 Aug 2020
Location: SWANSEA
Posts: 71
Not today but a couple of weeks ago (been away!) finished a fridge slide with a LifePo4 battery in a box. Victron charger behind the wheel arch panel.
Click image to enlarge
17th Jul 2024 5:59 pm
Disco-Jim
Member Since: 01 Mar 2024
Location: Wisbech
Posts: 71
Managed to get the front half dinitol waxed. Cavities done inside and out. Now need to do the rear end when I can get it in backwards.
Click image to enlarge
Not bad considering I had a leg on a cast and now in a moon boot as of today
18th Jul 2024 9:02 pm
mezlozna
Member Since: 05 Jun 2024
Location: Dundaga
Posts: 19
New Denso alternator fitted, alignment done. Found a nasty issue that needs attention
Click image to enlarge
16th Aug 2024 7:09 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 236
changed the top tailgate switch and actuator next job change the catch and cable. i will get it working.2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
24th Aug 2024 7:37 pm
RPAtotheStars
Member Since: 15 Sep 2023
Location: Dorset
Posts: 42
I fitted new DRL / Fog lamps from Powerful UK. All went ok, I fitted the cuircuit borad in a box iwth waterprrof cable glands to improve the protedtion.
All looks good.
I do need to just Mod the brackets to turn the fixing holes into slots so I can get the perfect fit.
27th Aug 2024 12:34 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 236
paul123 wrote:
changed the top tailgate switch and actuator next job change the catch and cable. i will get it working.
changed the actuator and cable still not working as it should so going to try another switch ( cheap ebay one) as we have now discovered it opens ok with the third button on the key. this only works on one key.2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
27th Aug 2024 7:38 pm
maccers
Member Since: 08 Dec 2012
Location: SE Kent
Posts: 276
Parked it up for a few weeks!
Badly chattering (i think) air conditioning compressor pulley so she's driveway'd until the garage can get it in.
7th Sep 2024 2:23 pm
Grunders
Member Since: 30 Apr 2011
Location: Manchester
Posts: 2334
New discs and pads on the front… cleaned up the callipers and gave them a paint
Click image to enlarge
Then I fitted LED bulbs to the halogen projector lights… massive differenceIf it ain't broke... Take it apart anyway, how else you gonna find out how it works
7th Sep 2024 6:41 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Fitted the shiny new shower tent I got from LRO at the weekend. The HUGE discount was well worth having a walk round on Friday before it opened
Click image to enlarge
2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
13th Sep 2024 4:20 pm
Grunders
Member Since: 30 Apr 2011
Location: Manchester
Posts: 2334
Took the side steps off and so glad I did, they were rusty underneath but where they fit to the car traps dirt and water causing the steel sills to start to rust, fortunately it was only surface rust and i think I’ve got it in time
I think the car looks so much better now
Click image to enlarge
Click image to enlarge
Click image to enlarge
If it ain't broke... Take it apart anyway, how else you gonna find out how it works
14th Sep 2024 4:05 pm
sub
Member Since: 04 Jul 2022
Location: Cheshire
Posts: 100
Click image to enlarge
Fitted a lightbar.
Was all fairly straightforward - tried to move the horns out of the way so I could better integrate it but then gave up and decided it'd be better on the bottom for stability. The grill holds it all securely in place.
Wired up with a loom to trigger off the main beam.
Excitedly waiting for dark.
14th Sep 2024 4:48 pm
GFE
Member Since: 11 Nov 2018
Location: Dorset
Posts: 119
So had its main dealer service today and as the Trans K9 box was out thought I’d fit my Raw Jack for the spare wheel. Looked like I’ll need to get a new wheel winch as I have the this one !
Click image to enlarge
Unless there is another adapter ?
14th Sep 2024 5:23 pm
Grunders
Member Since: 30 Apr 2011
Location: Manchester
Posts: 2334
sub wrote:
Click image to enlarge
Fitted a lightbar.
Was all fairly straightforward - tried to move the horns out of the way so I could better integrate it but then gave up and decided it'd be better on the bottom for stability. The grill holds it all securely in place.
Wired up with a loom to trigger off the main beam.
Excitedly waiting for dark.
Could you not put the light bar higher up between the silver grills instead of cutting the bottom of the grill?If it ain't broke... Take it apart anyway, how else you gonna find out how it works
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
