Member Since: 17 May 2009
Location: Bury
Posts: 2089
Look good not a great painter myself but have been dabbling with a little Plasti-dip lately on a couple of ali brackets i made which is fun.
I take it then that cat5 was good enough for switching relays?
By the way does the centre console just come out the same way as the older version with the gear stick as not had this one out yet unlike my old D3 and all the vids available seem to be of earlier D4’s? D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
28th Apr 2020 1:47 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Cat5 fine for switching relays
Centre console is easy (ish) to take out. Remove the cup holder and then undo 2 screw, now you need to be brave and pull from near the top and it will come out. I’ll see if I’ve got some photos of what I mean.
D4 MY15 SE TECH
D3 gone but never forgotten.
28th Apr 2020 1:57 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Console is clipped in here. Give it a pull and it should all come out.
D4 MY15 SE TECH
D3 gone but never forgotten.
28th Apr 2020 2:02 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Cheers Andy does it leave the terrain response section in place or does that come out with it?D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
28th Apr 2020 2:06 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
All comes out in one
D4 MY15 SE TECH
D3 gone but never forgotten.
28th Apr 2020 2:24 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15264
Brilliant mod Andy.
Is the aux battery totally concealed in the rear cubby, or does it protrude onto the floor area?
Certainly a mod I'd be interested in doing ......if only I had a brain.
...... always on the road less travelled 🚧
28th Apr 2020 3:15 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Andy Foster wrote:
All comes out in one
Many thanks
I obviously need to get my LR Passion switches in as well that I managed to source D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
28th Apr 2020 3:26 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Battery will be fully concealed. It a fully sealed unit so can be mounted in any orientation and won’t leak. Will probably be standing it on it’s end if that makes sense. Will sort some way of securing it when I get the rear boot trim off. Rained all day here so not done anymore work on it unfortunately.D4 MY15 SE TECH
D3 gone but never forgotten.
28th Apr 2020 3:36 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Couple of brackets fitted. These will be for some side lights when my awning is in use. Need a bit of fettleing bit happy with the fit and look. Will just be fitting a pair of cheap lights for now and will replace with something like I’ve got on the rear ladder, Lightforce ROK20
D4 MY15 SE TECH
D3 gone but never forgotten.
30th Apr 2020 7:45 am
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Finally got my switches connected up and must say I’m rather pleased with them.
This is the night time shot. They look very bright but in real life they are just right I think. Plus I’ll not forget I’ve got the turned on.
D4 MY15 SE TECH
D3 gone but never forgotten.
30th Apr 2020 8:38 pm
kirkyworld
Member Since: 01 Mar 2016
Location: Northampton
Posts: 566
a great looking truck Andy well done. I'm interested in the aux battery mounting in the rear cubby so following with interest.
30th Apr 2020 8:57 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Thanks for the comment
Prospeed do a mounting bracket that goes in the rear passenger side cubby box. Unfortunately they are out of stock at the minute so will cobble something together until I can get one of those D4 MY15 SE TECH
D3 gone but never forgotten.
30th Apr 2020 9:14 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Andy Foster wrote:
Finally got my switches connected up and must say I’m rather pleased with them.
This is the night time shot. They look very bright but in real life they are just right I think. Plus I’ll not forget I’ve got the turned on.
Like that light switch plate.
Have found it online.
Where did you get your switches from?formerly Disco3Ben
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
