Member Since: 01 Oct 2020
Location: Tallinn
Posts: 28
Thanks everyone for info this page. Just received L322 AH4210849AS Instrument cluster and wait PCB like Yargo showed from a Russian friend. Hope soon I can retrofitting this into my D3.
Now I have one question, how I can check that my dashboard is working? What I need to connect and what's pin? Will only need 12v enough or need something more?
I know that I shouldn't connect it to my car without PCB so any suggestions?LR4 V8 5.0 HSE Lux
Discovery III [60yrs Edition]
19th Mar 2021 2:19 pm
Yargo
Member Since: 25 Dec 2020
Location: Europe
Posts: 326
I failed with this whole idea. I could not fit dash from RR into D3, it just doesn`t fit, not enough space. I have been told I need to cut foam opening with stanley knife for cluster to fit, but that`s not for me. I have seen pictures and it doesn`t look perfect.
19th Mar 2021 2:22 pm
Yargo
Member Since: 25 Dec 2020
Location: Europe
Posts: 326
iSheeZ wrote:
Now I have one question, how I can check that my dashboard is working?
You can`t. Once you connect PCB with digital cluster, you will see if it works.
Quote:
What I need to connect and what's pin?
PCB will come with short cable with plugs on each end. Connect one plug to stock cluster, other plug to PCB. Then connect black and red to 12v battery. You will see lights flashing and lot of errors come up, wait until it says READY. Plug PCB into the back of digital cluster and then attach plug from car. Thats all.
Did they tell you about fuel gauge.... ?
19th Mar 2021 2:24 pm
iSheeZ
Member Since: 01 Oct 2020
Location: Tallinn
Posts: 28
Yargo wrote:
I could not fit dash from RR into D3, it just doesn`t fit, not enough space.
Yes, I think that saw your topic on drive2
I still not received PCB but already received instrument cluster so currently I need to check it and just turn on for checking screen.
What about fuel gauge – berZZ said that has problems with fuel consumption but Available range is displaying correctly. I hope it's not so bad, and they can fix that in further updates.LR4 V8 5.0 HSE Lux
Discovery III [60yrs Edition]
19th Mar 2021 2:49 pm
TheoC
Member Since: 15 Jan 2021
Location: Oregon
Posts: 3
@iSheeZ where were you able to purchase the pcb from?
6th Apr 2021 3:37 pm
Yargo
Member Since: 25 Dec 2020
Location: Europe
Posts: 326
Moscow
6th Apr 2021 3:46 pm
iSheeZ
Member Since: 01 Oct 2020
Location: Tallinn
Posts: 28
TheoC wrote:
@iSheeZ where were you able to purchase the pcb from?
Yep, from Moscow. I waited new firmware because updates possible only in Moscow. They (developers) send my pcb two weeks ago. Hope I get it soon.LR4 V8 5.0 HSE Lux
Discovery III [60yrs Edition]
6th Apr 2021 5:23 pm
iSheeZ
Member Since: 01 Oct 2020
Location: Tallinn
Posts: 28
Click image to enlarge
I just finished installation that PCB from Moscow (LANDY) and it's works! At first PCB read settings from your instrument cluster and then used yourself as MITM between car and digital instrument cluster. It's still not finished but almost done.
So, it was a challenge to install that instrument cluster in D3 I used my Dremel all day to correct dashboard. Also hard to find correct position and angle but at final its looks and works good.
LR4 V8 5.0 HSE Lux
Discovery III [60yrs Edition]
22nd Apr 2021 5:59 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6754
That’s an INSANE mod in the D3
22nd Apr 2021 6:56 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2890
iSheeZ wrote:
Looks really good! Must stop buying shiny toys....
22nd Apr 2021 8:22 pm
Niko
Member Since: 21 Apr 2021
Location: Athens
Posts: 1
I just read through the whole thread as I had seen this mod on another RRS.
So I got the screen and have ordered the eeprom reader does anyone have any pictures of what they cut away inside the dash? And how they modified the new instrument display, which tabs were cut etc.
Thanks
Nik
25th Apr 2021 8:02 am
Rs4-cab
Member Since: 03 May 2021
Location: Northampton
Posts: 4
Help
Hi all after reading through I have a cluster is anyone able to help programme ?
Also anyone put an l494 in the older l320 2012 ?
3rd May 2021 7:37 am
Deddou13
Member Since: 09 Jun 2021
Location: 95470
Posts: 4
Hello everybody,
I'm new on this topic and i'm very interested by this conversion. My car is a RRS 2008. Please can you confirm to me if it's possible on my car. Sorry for my english, i'm french, from Paris.
Thanks in advance for your reply.
9th Jun 2021 7:54 pm
Deddou13
Member Since: 09 Jun 2021
Location: 95470
Posts: 4
Yargo wrote:
I might be distributor in Europe (week or two). I`m not allowed to offer anything here, I will be breaking rules regarding commercial posts etc.
"reasonable" - depends how deep are your pockets, different for each of us.
Dear Yargo,
Are you distributor now ? Thanks in adavance
9th Jun 2021 7:59 pm
tapps33
Member Since: 17 Jun 2021
Location: Maine
Posts: 7
I realize this thread is a little old, but I'm just now getting around to this particular mod and hope some of the Op's can lend me some advice!
I have a couple of quick questions for @Jame1974;
First, did you ever try to swap the internal components from the TFT display over to the stock cluster frame? I know the fitment seems to be a bit of a pain....I'm just wondering if there is a slightly better solution. Full disclosure, I've got a TFT on the way and haven't taken the old one apart yet.
On a completely separate note, I read that you were going to try upgrading your 2010 nav system to the newer 2012+ system. I didn't see any updates on it and wanted to see if you got it all sorted out? I too have been trying to attempt that particular upgrade for quite some time, (I have a 2010 LR4 as well) but every time I think I have it all figured out, I run into another road block. Not to mention, sourcing the harnesses here in the US has been a royal pain in the rear! I'm so tired of hearing, "Wait, what are you doing?......just give me your VIN." So frustrating!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I used my Dremel all day to correct dashboard. Also hard to find correct position and angle but at final its looks and works good.
