Member Since: 27 Dec 2013
Location: Kent
Posts: 951
Very true. I found out exactly what the cause is of the sidestep issue, turned out to be the rubber trim that sits on top hasn't been pushed in properly by me. I will get on that later today if I remember. Been concentrating on removing the rust, sealing the metal and coating in hammerite at the front before I install the new bumper.
26th Feb 2021 2:53 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
Glad today is over, feel happy that I achieved what I set out to achieve, but the front parking sensors need activating and oddly the same fog light isn't working despite being a different bumper with new foglights. Hopefully just a bulb. Light guards back on as well and although I was going to chrome the front up, I ended up dechroming the new bumper. Physically, today has destroyed me. But the front is done.
Click image to enlarge
I plan on making up the missing brackets tomorrow for the D4 rear light guards, I am going to wait unitl the weather is warmer for the paint as I am not confident that I can do my best work whilst having to use a heat lamp to dry it out. We will see. I will be replacing the door trim as well soon.
26th Feb 2021 7:02 pm
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
Great work - love the light grills and really tempted to get some too - I'm anti chrome (child of the 70's? ) so think bumper looks good!
I noticed you like pictures of tonga green disco's & trailers...... - testing out my first ever trailer and then took for a quick spin for the first time towing something!
26th Feb 2021 11:03 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
I bet your Discovery didn't feel any different with that behind it
27th Feb 2021 10:47 am
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
I know there will be a lot of haters for what I am about to do and to be honest, I wouldn't have gone for this modification, but I have bought bonnet vents, these are not just the stick on top and look pretty rubbish, these are actual proper cut a hole in the bonnet to make fit vents. But because of the vandalism, it was going to cost £250-£300 just to respray the current bonnet and the replacement in the correct colour needed as much work as my existing one. So £16 for Ford Focus RS style vents, and I get to cut the word scratches on my bonnet out! Win Win for me. And I actually do like the look of these vents on the car. What I can't decide though, is whether to colour code them or not.
I may or may not be cutting the holes in my bonnet today
The Discovery isn't really in use at the moment so for me, it is the perfect time for tinkering. It is a shame though that these bonnet vents aren't bolt on though, as I would feel more at ease about fitting them, as I would be able to just unbolt them and paint them if I decided I wanted to colour code them. But I will be using tiger seal to stick them on. And on the side that has the battery, I won't be cutting the bonnet liner. Just the drivers side. I will also be considering doing this potentially on my Range Rover lol
27th Feb 2021 10:57 am
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
I can already hear the gasps BUT I got bored and those vents were sat there screaming fit me. So I have got started with the installation.
27th Feb 2021 2:05 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
The vents are now fitted, I tried the supplied mounting tape, and despite using paint prep wipes, it didn't want to stick, so pulled it all off and went for plan B which was tiger seal. So now waiting for that to to dry so I can tidy up the excess adhesive. I left the vents black. I think with the grill, It will suit the look better.
I know, my priorities are backwards
27th Feb 2021 4:06 pm
discovery3ski
Member Since: 25 Dec 2012
Location: leicester
Posts: 735
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
I don't mind if they look defenderish. As long as they don't look Fiesta'ish
Click image to enlarge
The night won't pass fast enough, I would like time to fast forwards to tomorrow so I can take the tape off and see how it has come out.
27th Feb 2021 7:14 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
I was going to wait, then I thought, sod it, I have started painting the rear passenger quarter panel. Got impatient with part of it and ended up with a big run mark so got to sand that down again, I probably wont be doing the door today though. And to give the bonnet vents maximum chance to stick, I will wait until 3.30pm to remove the tape
Click image to enlarge
28th Feb 2021 11:36 am
DN D3 Decade
Member Since: 23 Jun 2006
Location: W.London.
Posts: 2345
Do those vents have holes going all the way through them ? If so, how are you going to prevent water getting in inside and under the bonnet ? ...... ( I know you have enough to do already, but just curious ). D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
28th Feb 2021 12:50 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
The vents are all the way through, a small amount is directly into the engine bay but above the bonnet liner and the rest sits the in the sealed double skin area. A job that is actually on the cards for tomorrow as I am hopefully sorting a new private plate for the car tomorrow as well, but in theory the water will follow the channel under the bonnet to the front of the bonnet and should drain out of a hidden hole under the bonnet somewhere. Hoping that there is already a hole of some sort as I hate drilling The vents aren't massively exposed so only a small amount of rain water will get in, and because they are raised on the bonnet, any running water on the bonnet will go around them rather than in them. Probably will be teething issues to sort out with this installation, but will deal with them as they arise.
28th Feb 2021 2:22 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
All that effort went to waste. Halfords high build primer is rubbish! So now sanded the areas with graffiti back to bare metal and will start again tomorrow. Hopefully I will have all the paint both sides of the car on by the end of Tuesday. I don't mind if the lacquer is not on until the next dry day, but Wednesday onwards is forecasted as rain every day.
I got it to this stage, then was horrified when I realised I could read the words I had made the mistake of sanding out, I should have sanded a whole section back to bare metal. Which is what I have now done on it all except for the door. I hope to get on to that tomorrow.
Now bare metal
28th Feb 2021 5:17 pm
discovery3ski
Member Since: 25 Dec 2012
Location: leicester
Posts: 735
Painting cars well is practically chemistry these days. I miss cellulose.Discovery 3 tdv6 HSE 2007
Alfa GTV CUP
Alfa 156 JTS
Alfa Spider TS
Alfa GT Cloverleaf
Volvo XC70
28th Feb 2021 7:55 pm
disco-nut
Member Since: 27 Dec 2013
Location: Kent
Posts: 951
I am now playing the waiting game, sent my partner out on a supplies run So waiting for primer and paint prep wipes and for the temperatures to reach double figures in the shade. The rear passenger brake has seized quite badly now so have to use low range to move the car around, but I don't need to use the Discovery for the next month anyway, so literally just going to be getting little upgrades and other jobs where I already have parts ticked off. Then the Discovery can go to the garage on the back of big yella and be fixed under warranty. Also feeling very excited, have managed to move enough money around to hopefully have enough to pay for my private plate. 2 reasons I want one, 1 is because the current reg constantly reminds me of what my neighbour did, and 2, I just want one April, I will probably sorn the Discovery off of the road for a month as well as the Freelander and Range Rover are my daily drivers and the tax on my Range Rover is FREE
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Very true. I found out exactly what the cause is of the sidestep issue, turned out to be the rubber trim that sits on top hasn't been pushed in properly by me. I will get on that later today if I remember. Been concentrating on removing the rust, sealing the metal and coating in hammerite at the front before I install the new bumper.
) so think bumper looks good!
- testing out my first ever trailer and then took for a quick spin for the first time towing something!
so got to sand that down again, I probably wont be doing the door today though. And to give the bonnet vents maximum chance to stick, I will wait until 3.30pm to remove the tape 
