Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525
TOO MANY PIGS
sad to watch the media show many farms struggling with more stock than they can handle...think there will be an outcry if a mass cull is activated...many bacon buttys wasted
1st Oct 2021 11:40 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14388
Its even sader and more stupid becuase we are importing meat from the EU becuase we can't process it because the abatoir workers and butchers have gone back to the EU and no one wants to do it in the UK.
Nut roast anyone?New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
2nd Oct 2021 10:56 am
highlands
Member Since: 10 Jan 2010
Location: NW Highlands
Posts: 5103
Quote:
Nut roast anyone
No thanks. We've still got about 2 pigs' worth of pork in the freezer and are about to add another 2 to the tally. Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
2nd Oct 2021 12:33 pm
s60r
Member Since: 14 Mar 2021
Location: West Sussex
Posts: 287
Haha…
This does slightly annoy me….not you moo! …. Just the situation.
There a plenty of people who would work in these industries but we have relied on the foreign legion for so long that people don’t even know of the sectors that require people injections….. it’s about time for drives to recruit in the sectors that are needed…
Lorry driving or abattoirs are just 2 topical ones…..I’m sure there are many more….. I wonder how many are claiming unemployment benefit that may enjoy a job in the areas previously occupied by foreign labour.
It’s incredible how it’s cheaper and quicker to bring over labour from abroad rather than utilise or incentivise our own….I know that’s a simplistic view to a way deeper issue but I’m sure a halfway point is possible…it will take time that’s the problem - as everyone wants an instant fix these days.A mod a week until I have nothing to improve or add.
2nd Oct 2021 12:38 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
Take a look at the U.K. unemployment rate in the 10 years prior to the Covid pandemic.
Then consider the fact that during that time period successive governments chose not to control or manage EU Freedom of Movement as they could have done. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
Last edited by LT on 2nd Oct 2021 3:52 pm. Edited 2 times in total
2nd Oct 2021 2:20 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
I would hazard a guess the EU workers back home will tell us to stick our problem where the sun does not shine!
2nd Oct 2021 3:22 pm
J77
Member Since: 03 Mar 2008
Location: Fife
Posts: 6270
Plenty locally produced pork in my freezer, as far as I’m aware they seem to be okay.23.5MY Defender 90 X-Dynamic SE D250 MHEV Pangea Green
2nd Oct 2021 5:40 pm
Paul J.
Member Since: 09 Dec 2005
Location: Leafy Cheshire
Posts: 7621
LT wrote:
Take a look at the U.K. unemployment rate in the 10 years prior to the Covid pandemic.
Then consider the fact that during that time period successive governments chose not to control or manage EU Freedom of Movement as they could have done.
Tell me. Could the FOM rules have stopped the exploitation of cheap labour from other EU member states? Yes or no.?
An ex-Disco3 / FFRR owner ......
..... now on the JLR electric highway.
2nd Oct 2021 10:24 pm
mse
Member Since: 27 Jun 2005
Location: Shropshire
Posts: 2704
Could you define exploitation
Surely there is a rate of pay for a job that is at our above minimum wageMike
2nd Oct 2021 10:39 pm
Paul J.
Member Since: 09 Dec 2005
Location: Leafy Cheshire
Posts: 7621
You tell me. If the local market rate was being paid, why was there a reliance on cheap Eastern European labour?
If I am wrong, then there was no exploitation. An ex-Disco3 / FFRR owner ......
..... now on the JLR electric highway.
2nd Oct 2021 11:11 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
Paul J. wrote:
LT wrote:
Take a look at the U.K. unemployment rate in the 10 years prior to the Covid pandemic.
Then consider the fact that during that time period successive governments chose not to control or manage EU Freedom of Movement as they could have done.
Tell me. Could the FOM rules have stopped the exploitation of cheap labour from other EU member states? Yes or no.?
I think you must be confusing the abhorrent and illegal exploitation of illegal immigrants from outside the EEA with EU FOM.
The governments of EU member countries have always set there own minimum wages and individual employers are free to pay a wage above this minimum.
The fact is that the vast majority of employers did not deliberately seek to fill vacancies with migrant workers. They employed EEA migrants when they were the best or, sometimes, the only available candidates.
Before the disastrous decision to end FOM, among the reasons given by U.K. employers for why an EEA migrant might be the best candidate for a job, were:
• the necessary skills are scarce among the UK-born workforce;
• migrants often have a higher motivation to work so are more productive and reliable;
• migrants are prepared to do jobs in difficult conditions that the UK-born workforce
are not interested in.
• low unemployment means a low supply of UK-born workers.
All of the above is verified by the current labour shortages across many sectors. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
2nd Oct 2021 11:16 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
This:
2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
I'm told that the abattoir near here (previously staffed mostly by Eastern Europeans) is having prisoners bussed-in from Swansea prison every morning (and back again in the evening) to get the work done.
2015 Volvo V40
2014 D4 HSE
2006 RRS - C'est mort. Fin... ...It's alive! Oh no, it's not - scrapped.
2019 Suzuki Kingquad 400
2017 RamRod Taskmaster 1150
1977 John Deere 2130
3rd Oct 2021 3:10 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10352
What, by Eastern European prisoners?
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
3rd Oct 2021 3:20 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
HWN wrote:
I'm told that the abattoir near here (previously staffed mostly by Eastern Europeans) is having prisoners bussed-in from Swansea prison every morning (and back again in the evening) to get the work done.
Proof, not that it was needed, that the local workforce is not able to absorb the loss of the EU abattoir workers. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum