Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1815
  
|
Motolab wrote:Picture 1 of you ,shows that there is a “counter piece plastic” still attached to the plug…
Looks like something is broken off?
answered that to him allready on 8th Apr 2022 8:50 pm  Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc. 
|
 8th Oct 2022 10:50 am |
|
|
BradC
Member Since: 29 Apr 2019
Location: Perth
Posts: 118
 
|
Martin wrote:A common issue, you need a new plastic cover - salvage one from a secondhand/scrap heater?
I removed the electronics module, then removed the electronics from the cover. Cleaned with a good alcohol (I use PVC priming fluid - a 50/50 of Acetone and MEK) on both sides, the piece can be glued back in using 24HR Araldite (super strength I think it's called these days). Build an extra smear on the outside and a good bead on the inside then cure in a fan forced oven starting at 50C and building to ~90C over 4 hours.
Hasn't broken yet.
Of course FBH are as rare as the proverbial rocking horse droppings down here. You guys can probably just pick up a second hand one for 20 quid.
|
| 8th Oct 2022 2:48 pm |
|
|
sol_stevo
Member Since: 17 Jul 2021
Location: The Empire
Posts: 174
 
|
Thanks all for your suggestions i will be getting round to properly investigating this set of days off. 
|
| 18th Oct 2022 2:49 am |
|
|
