Member Since: 17 Jul 2021
Location: The Empire
Posts: 174
Can someone post a photo of their fuel burning heater?
Can someone please post a photo of the associated cables and fuel burning heater whilst it's in their bonnet as mine isn't turning in and the wires were disconnected however one of male connectors won't fit into the female connector, can someone just show me what they look like so I can wire it up as I've never had ti mess with it before.
Thanks,
Sol
8th Apr 2022 1:05 pm
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
Is this any good for you
Previous cars
Discovery 200 tdi
Discovery 300 tdi
Discovery td5
8th Apr 2022 1:56 pm
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
The bottom white wire is for my fbh controller
Previous cars
Discovery 200 tdi
Discovery 300 tdi
Discovery td5
8th Apr 2022 1:57 pm
sol_stevo
Member Since: 17 Jul 2021
Location: The Empire
Posts: 174
Should it look like this and how could I test it? Cold weather's gone for now
8th Apr 2022 2:54 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Picture 1 of you ,shows that there is a “counter piece plastic” still attached to the plug…
Looks like something is broken off?Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
8th Apr 2022 6:50 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
This is a new one, (still without the pins though and unlocked)
So you can see the different look compaired to yoursBest regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
8th Apr 2022 6:57 pm
sol_stevo
Member Since: 17 Jul 2021
Location: The Empire
Posts: 174
I'll have a go at getting it off, cheers it looked out of place but it fit weirdly enough maybe why it's not working
I think you can test it with the IID by tool and purge the fbh
Steve
9th Apr 2022 7:46 am
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
NCC-1031 wrote:
I think you can test it with the IID by tool and purge the fbh
Steve
that is a WRONG advice TBH
NEVER Purge a FBH when the fuel lines NOT have been disconnected or there is NOT an air bubble problem
(what almost never occures when the fuel lines not have been disconnected)
Purging is ONLY used for filling NEW or otherwise empty fuel lines... if otherwise used, you will fill the FBH burningroom with plain diesel (diesel does NOT evaporate by itself) so the burner will soot up very quick, glowplugs become isolated then and will die
IF you use your IID, just do a start/running sequence and let it burn for at least 10 minutes, NEVER shorter..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
9th Apr 2022 8:17 am
sol_stevo
Member Since: 17 Jul 2021
Location: The Empire
Posts: 174
Motolab wrote:
This is a new one, (still without the pins though and unlocked)
So you can see the different look compaired to yours
Late reply i know, can it be replaced or does a new FBH have to be purchased?
8th Oct 2022 12:34 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Hi
Is this any help to u , ref dull details about the FBH
Connector , I think this is the one ur looking for , part number YPC800410
There’s also some on eBay if u end up needing a complete unit
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
sol_stevo wrote:
Late reply i know, can it be replaced or does a new FBH have to be purchased?
if it still clamps on the pins itself.... clean it (the pins) fit the plug as it is and a small dot of kit (like sika 291) to keep it in place .... saves a lot of money and hassle IMHO...Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
8th Oct 2022 9:38 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
The plug isn't broken, the plastic cover from the FBH has snapped off and come off in the plug. A common problem where the plug gets pulled off without unlatching it first.
A common issue, you need a new plastic cover - salvage one from a secondhand/scrap heater?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
