Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Mini toggle switch from Maplin
Clive
3rd Mar 2012 9:35 pm
Ajp001
Member Since: 20 Aug 2011
Location: Cambs
Posts: 86
Cheers Clive
4th Mar 2012 8:03 pm
aljo
Member Since: 20 May 2007
Location: west sussex
Posts: 804
wiggs wrote:
the biggest issue is the brightness ....once it thinks the car is a range rover it stops using the inbuilt light sensor . The screen is then quite dark
I had a seperate dimmer made which plugged into the main board on the nav screen ...cured the dimming issue
Tried this mod and works fine apart from the screen brightness!(makes the screen no good during the day) could you give a bit more detail on the dimmer you had made adrian ?
thanksLast night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
5th Mar 2012 8:58 pm
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
Hummm brighter seasons coming up, I think mine will be back to D3mode .
tbh Its been on 4x4info screen anyway, as it always is....
5th Mar 2012 11:06 pm
Ajay(UK)
Member Since: 07 Apr 2009
Location: Arundel, West Sussex
Posts: 316
aljo wrote:
Tried this mod and works fine apart from the screen brightness!(makes the screen no good during the day) could you give a bit more detail on the dimmer you had made adrian ?
thanks
Yep, same here - definately not bright enough during the day Staying on D3 software until a fix is known.
Andy.2022MY Defender 110 D250 HSE X Dynamic, Gondwana with options!
2015 Range Rover 4.4 SDV8 Autobiography, Indus Silver, Black Pack
Gone:Disco 4 HSE Luxury, Firenze Red, Ebony/Ivory
Gone:2006 FFRR TD6 Autobiography, Black
Gone: 2013 Jaguar XKR Convertible, Italian Racing Red😢
Gone: 2008 Disco 3 HSE, Hybrid Tv + Retro-fit RSE System & DVD
Gone: 2010 FFRR TDV8 Vogue SE, RSE & DVD, Stornoway Grey
6th Mar 2012 11:20 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
the dimmer was made by a forum member on here ....unfortunatly he is very busy and i dont want to pass on his details without his permission . I had asked about making some extras a while back ...but it time issue for him .
If he wants to come forward with the offer of making more im sure he will
I can tell you there is a little board with a 2 pin connector on ..this goes to the sensor ( size of an led ) that picks up the light
then there are 3 wires ....2 that connect to one of the terminal rails inside the screen and the other to a ground point on the screenG4 Gone ...but not forgotten
6th Mar 2012 12:33 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 593
Lets hope he comes forward, because i would be interested in this! Ive just switched back because it is too dark!
6th Mar 2012 1:27 pm
aljo
Member Since: 20 May 2007
Location: west sussex
Posts: 804
Not had a look inside the SAT/NAV screen unit itself, but would it be easier to fit a small 12v led inside the screen unit as a back light and run the power from the dimmer switch for the dash ? or run power to the input side of the wire that was cut ? or does it not work like that ? Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
6th Mar 2012 5:51 pm
mkt29
Member Since: 16 Feb 2012
Location: Cheshire
Posts: 9
I've also tried the different look and like having the radio and phone controls on the screen but it is too dim for daytime use (for me anyway).
Details on the required dimmer circuit or device would be greatly appreciated.
7th Mar 2012 9:57 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
wiggs wrote:
the biggest issue is the brightness.........
if you enable the reversing camera ...then it will work automatically when in RR mode
If the reversing camera is enabled in LR mode will it also work automatically without a gvif module?It can when others can't,
It will when others won't,
It goes where others don't.
7th Mar 2012 4:19 pm
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
Very interesting psot, and I am going to try this weekend
Wiggs, no words
Only one question, I have faultmate, Is it not possible to change D3 and RRS mode using MSV-2?
If I understand right, you can change D3 to RR only cutting one of the wires, and if you want to change again betwwen those modes, yo can put a switch, right?
Yes you put a switch on the wire then select what you want let the car go to sleep and when it reboots it loads whatever software the switch is set for...
But I too find the screen dim but looking in to a way as well..
Flack
16th Mar 2012 9:14 pm
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
Thanks Flack,
Also I am interested the screen dim...
16th Mar 2012 9:20 pm
Ajp001
Member Since: 20 Aug 2011
Location: Cambs
Posts: 86
Hi, got the mod working but have a query on the phone book. I have a 2005 HSE with PTI and voice and the updated bt module. I get the phone on the the touchscreen and I get the missed calls etc with the contact showing against it but I DONT get the ability to browse the phone book - greyed out. Linked to a blackberry so may be that that is the problem. Has anyone else had this? I have a cradle so going to borrow an old Nokia and see if it displays the phone book on screen then... Would a d4 module resolve?
Brightness is a problem but I much prefer the rr functionality! Also ingested in the light sensing mod!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Staying on D3 software until a fix is known.
