Member Since: 09 Apr 2012
Location: Wagga Wagga
Posts: 7
Wiggs,
I have a surround camera
Des
9th Apr 2012 11:40 pm
DRD
Member Since: 09 Apr 2012
Location: Wagga Wagga
Posts: 7
Wiggs,
I forgot to say that I don't have Sat Nav
Cheers Des
10th Apr 2012 4:31 am
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
Russell wrote:
Wiggs is the MY12 the same or diffrent, have not had chance to pull the screen out yet.
Go on Russell pull your screen out Club Forum Criminal !!!
10th Apr 2012 5:25 am
troche
Member Since: 08 May 2012
Location: Shortland NSW
Posts: 7
Wiggs - I'm new on the forum (and resident in Australia) but am interested in the additional cameras for my RRS MY2012 - which I think is same electronically as the D4 ?
The website below says they have kit to add cameras to factory install D4 or 2010 onwards RRS:-
Do you know anything about it and whether it would work ? I'm a bit nervous because
I have just sold a MY2007 RRs and had a GVIF NavVideo system on it connecting rear view camera, camera in horse float and camera on back of horse float - worked beautifully throught the factory GPS system - but doesn't work with 2012 version and no-one over here seems to have come up with a solution !
Can I purchase a surround camera box aftermarket so I can just plug into 2012 system ?
Your help much appreciated as wife wants to take horses out to the beach and I want to go fishing !!
Regards
Terry
8th May 2012 5:10 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
The link you sent deffinatly works on 2010MY onwards ... Not 100 % about 2012 though as the infotainment system was all changed in that year
You do have to take the screen apart to fit the interface .. But not difficultG4 Gone ...but not forgotten
9th May 2012 8:32 am
troche
Member Since: 08 May 2012
Location: Shortland NSW
Posts: 7
Wiggs - that interface isn't configured correctly for the 2012 screen - but I took photos of the 2012 screen back and connections if that is of use to you or anyone on the forum and I've send them to HIDs4U so they can work on changing connections so it works on 2012 RRS and D4.
I'll let you know what happens.
How do I upload those photos to this forum ?
Can one purchase the surround camera system from an aftermarket source and then connect my float cameras to it ?
Terry
9th May 2012 9:10 am
troche
Member Since: 08 May 2012
Location: Shortland NSW
Posts: 7
Wiggs - that interface isn't configured correctly for the 2012 screen - but I took photos of the 2012 screen back and connections if that is of use to you or anyone on the forum and I've send them to HIDs4U so they can work on changing connections so it works on 2012 RRS and D4.
I'll let you know what happens.
How do I upload those photos to this forum ?
Can one purchase the surround camera system from an aftermarket source and then connect my float cameras to it ?
Terry
9th May 2012 9:10 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
It dosent connect to the back of tbe screen .. It's connected internallyG4 Gone ...but not forgotten
9th May 2012 11:11 am
troche
Member Since: 08 May 2012
Location: Shortland NSW
Posts: 7
From what I can see there are a number of connections that piggy back onto original connections so that a switch can operate video onto the sat nav screen without interfering with the original screen operation.
9th May 2012 12:35 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
this is connected inside the screen ..on the circuit board
i have just removed one a few days ago from a 2010 screenG4 Gone ...but not forgotten
9th May 2012 12:53 pm
troche
Member Since: 08 May 2012
Location: Shortland NSW
Posts: 7
That is the circuit boards from the HIDs equipment - the right hand side board (Bottom) has the touch screen (top black bit) connecting in from the top - wheras my screen requires connection from the left - see photo 1 on previous email.
How do I upload photos onto this forum ?
Terry
9th May 2012 1:12 pm
abeachsoul
Member Since: 12 Jun 2012
Location: United Kingdom
Posts: 1
CCF edit to enable camera?
Hi,
Just wondering how easy it is to edit the CCF to enable the video inputs behind the HLDF on an '06 RRS ? Would a dealer do this and how much would they charge or does anybody know of an OBD connected piece of software that allows reading and editing of CCF?
Thanks!
Rich
12th Jun 2012 12:23 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
You can enable them .. But they will only work when the correct LR tv / DVD is connected ( other wise they stay grayed out once enabled )
Search for black box solutions for the CCF tool ... You need a faultmate msv2G4 Gone ...but not forgotten
12th Jun 2012 12:54 pm
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
Here are some pictures curtesy of a forum member who was having difficulty uploading them
MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
18th Jun 2012 6:11 pm
CUCO
Member Since: 26 May 2011
Location: Spain & Oleee!!!
Posts: 609
Why in this last picture the screen have 4 conectors?? usual screens have three isn`t it?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
