DISCO4.COM - View topic - Retrofit Surround cameras

bullevard

Member Since: 02 Feb 2019
Location: Monster
Posts: 58

2011 LR4 4.0 V6 Petrol HSE Auto Fuji White

MikeBob wrote:
The parking aid is the wrong setting to change. You need to write to GAP and ask them to activate the untested settings for you. What model is your vehicle? SE or S ? I’m wondering what the IBOC setting refers to as I’m my car is set as not fitted

And they just did. So at the untested area I activated a few cameras. Still no Extra button or so. Only reverse camera. I also activated the venture camera and did receive extra camera button at 4x4 menu.

So does that means the I probably didn’t connect the camera module write? Or even if you’re not connecting the module, do you get an Extra touch button visible?

19th Apr 2020 4:42 pm

MikeBob

Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115

2010 Discovery 4 3.0 TDV6 SE Auto Ipanema Sand

It seems it’s not connected correctly. I also have the cameras in the 4x4 screen. But no camera button on the home screen yet. Even without the module connected you should have the camera button if the settings are correct

19th Apr 2020 4:58 pm

bullevard

Member Since: 02 Feb 2019
Location: Monster
Posts: 58

Re: Retrofit Surround cameras

wiggs wrote:
Started testing surround camera stuff to go in a mates car..

I already have surround cameras in mine , so wired in a new module and used my exsisting ccf to make sure in principle it will work ...which it did

Just need to set up his ccf for surround cameras then give them a quick test before the hard work of routing all the wires

Made up the connector which goes in back of screen and down to the camera module ...all working great

Car in bits (again )

taking power and can bus signal from diagnostic port for testing

surround camera module

just one camera fitted

reversing lines gererated by the module

Wigges, can you please provide me the testing scheme? I would like to test it through the diagnostic port. I also don’t have the original plug that goes into the module.

19th Apr 2020 5:03 pm

M3bobby

Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857

You’ve lost me with the camera icon on the home screen. The icon comes up next to the 4x4 icon. Then if you want it as a shortcut on the home screen, you need to go into settings and set it as a home screen short cut. It doesn’t automatically place a shortcut there, you need to select it. 012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)

19th Apr 2020 5:27 pm

MikeBob

Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115

On the 2010/2011 screen the camera button only appears on the home screen. The 2012 on screen is different.

19th Apr 2020 5:36 pm

bullevard

Member Since: 02 Feb 2019
Location: Monster
Posts: 58

This is all I got. See pics.

19th Apr 2020 5:42 pm

MikeBob

Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115

I have the same, but we need the camera button on home screen next to 4x4info

19th Apr 2020 5:45 pm

bullevard

Member Since: 02 Feb 2019
Location: Monster
Posts: 58

And this is also what I would like to see.

19th Apr 2020 5:49 pm

MikeBob

Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115

You get that by pressing the button we need on home screen.

19th Apr 2020 5:52 pm

M3bobby

Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857

Ok, sorry didn’t realise the earlier model wasn’t selectable. I think the issue you have now is that the system thinks you have a venture camera fitted which you don’t. You need to de-select the Venture cam CCF edit and find the missing file. I’ve updated my IID tool since my retro fit and I think the file has now gone. I’m pretty sure there was another file for IPMB (Image Processing Module B) but I could be wrong as it’s been a few years. If I can get on to it tomorrow I’ll re-survey my file and compare it to my original. In the mean time I screen shot these details.

This photo shows (on a 2012) how the shortcut appears on the home screen with the module off line. This greyed out icon is how I would expect to see the option activated without module fitted.

012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)

19th Apr 2020 6:00 pm

bullevard

Member Since: 02 Feb 2019
Location: Monster
Posts: 58

I believe you’re right. So it could be a software issue. It should appears but greyed out.

19th Apr 2020 6:08 pm

M3bobby

Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857

This is the file I can no longer get to but it maybe a 2012 on thing but I can’t be sure.

012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)

19th Apr 2020 6:13 pm

MikeBob

Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115

My CCF looks the same as what you have posted, apart from the venture cam. I’ll deactivate in the morning and let you know. I’ll also chat to a mate who has a 2010 model with the cameras and see if he has the venture camera buttons or not.