Member Since: 08 May 2006
Location: Bristol
Posts: 16390
great thanks
ive order a new battery today, so should be delivered Tuesday.Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
9th Aug 2015 3:18 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
installed battery and reset - all good
except ............
ive just connected up the caravan to check a few things and noticed the fridge wasn't working on 12v.
checked the towing electrics settings on the IIDTool and it was set to the 13 pin option.
I have the 12N and 12S sockets... can someone advise me what the setting should be please, if that is not correct ?
caravan has a reversing light and fog lights and the ATC was engaging correctly
Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
12th Aug 2015 1:17 pm
RSAChris
Member Since: 16 Apr 2010
Location: Centurion RSA
Posts: 154
Mine is also set to 13 pin.
I use the right hand (black) 7 pin connector (12N) for the standard trailer connections (South Africa only uses 7 pin).
I tap power for the 12Volt electrics (fridge and spare batteries) from the 12S connector pins 3 (Negative) and 4 (positive).
A good diagram is found here:
http://www.defender2.net/forum/topic13068-15.htmlProud owner of an IIDTool
2010 Disco 4 TDV6 SE
R2D3 the 2007 Disco 3 TDV6 SE... gone now
Romulus [Defender 110 CSW Td5] will always be missed
Rofty [Defender 110 CSW Td5] first Td5 and start of motor electronics...
www.flickr.com/photos/the_steyns
13th Aug 2015 9:06 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The CCF setting does not turn the 12v fridge supply on or off so this looks like a regular electrical issue.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
thanks Robbie
ill have to do some tests at the weekend
thanks allDuncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
13th Aug 2015 2:44 pm
HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
My IIDToolBT works great on my car (2012 D4) but won't work on a friends 2011 D4. When plugged in, there are no lights on the unit illuminating at all and it won't be recognised by my iPad. We checked the diagnostics socket fuse and for 12 volts at pin 16 and all seems to be in order. My friend asked another friend to plug in his diagnostics tool (don't know what make it was) and he tells me it worked fine.
Any ideas?
13th Aug 2015 5:59 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
My only thought, was it pushed fully home?
13th Aug 2015 6:01 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
And could you access it using the radio buttons?
13th Aug 2015 6:03 pm
HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
tayaste wrote:
My only thought, was it pushed fully home?
Good suggestion to check the basics first. Gave it a couple of wiggles. Things always work better when they are pushed fully in.
Never tried the radio buttons. Didn't get any indication on the screen in front of the steering wheel.
13th Aug 2015 8:37 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
Q :
can I flash my instrument panel on my MY10 to display the same info as on the MY12 etc, ie satnav info, etc
if so how ?
Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
18th Aug 2015 9:05 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
You can update the IPC display to 12MY, but don't think you get the extra info. I believe it only changes the look of the TFTMy D3 Build Thread
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
ok thanks, how do I do that ?Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
18th Aug 2015 11:50 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
as simple as that ?? Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
18th Aug 2015 11:56 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
If my memory serves me correctly, then yes.
ISTR there are (or were) 2 options, one for standard firmware, one for later firmware...My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
