Member Since: 02 Nov 2016
Location: Surrey
Posts: 1049
Looks good, do they re-trim while you wait?Just 'cause you got the power... that don't mean you got the right.
19th May 2020 8:37 pm
Hormic23
Member Since: 14 Aug 2017
Location: Hampshire
Posts: 99
Thanks, it’s a bit more chunky than the original but improves the inside of the car no end. No they re-trim a stock wheel as per your specifications in advance then transfer the switches/airbag on fitting. They do a postal service too.2007 D3 TDV6 XS - GONE
BAS Remap
EGRs blanked
Adaptive bi-xenons
RLD spare wheel protector
20th May 2020 11:41 am
Shane1000rr
Member Since: 04 Jan 2020
Location: County Durham
Posts: 97
Timing belt and oil pump replacement as I had the original one. Belt had been done by previous owner but never replaced oil pump.
22nd May 2020 7:08 pm
Attodisco3
Member Since: 07 Jan 2020
Location: Sevenoaks
Posts: 60
rrhool wrote:
Grille swap
Before
After
Looks fantastic, can I ask where you got this from in zermatt as I would like one.
Thanks
23rd May 2020 10:30 pm
Attodisco3
Member Since: 07 Jan 2020
Location: Sevenoaks
Posts: 60
Today she got 4 new boots.
23rd May 2020 10:31 pm
sarumlight
Member Since: 06 Nov 2008
Location: Off the Plain
Posts: 1595
Went to start the D3 today after at least six weeks. Had spare battery, jump leads, voltmeter at the ready but she started at first turn of the key. Love this car as much as I did nearly twelve years ago!
24th May 2020 12:29 am
Bulatovic
Member Since: 19 May 2020
Location: Belgrade
Posts: 38
Fixed the driver's arm rest - super happy i stumbled upon a thread here suggesting it's just a loose split pin saved me several tenths of GBP and awaiting shipment of a spare armrest.
Fixed dislodged centre console opening handle - rivet got pulled out rather than broken as feared.
On to seat rails that rock back and forth a few millimetres annoyingly.
Since it's 3rd day of ownership, liking the occasional diy stuff to tidy up - let's see where it brings me
25th May 2020 11:10 am
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
Oil and filters changed and cleaned up the covers in the engine bay.
Also cleaned up and painted the two front undertrays.
25th May 2020 3:58 pm
Hormic23
Member Since: 14 Aug 2017
Location: Hampshire
Posts: 99
Finally got around to fitting a silicone intercooler hose that arrived last week from BAS. Really good service from Pete and team , order dispatched within the hour and arrived next day
Member Since: 08 Jul 2017
Location: cheshire
Posts: 143
ordered a new tail gate release, as it died on us yesterday with a boot full of furnitureD3 HSE 2.7 TDV6 named Calvin with him stuffed Tiger Hobbes sat in the back
31st May 2020 7:04 pm
Shane1000rr
Member Since: 04 Jan 2020
Location: County Durham
Posts: 97
Removed stripped down and painted gear knob as paint was worn on mine and at £50 for a new one thought I would have a go at tidying it up.
31st May 2020 8:44 pm
Bulatovic
Member Since: 19 May 2020
Location: Belgrade
Posts: 38
Learned that the battery is low upon hardwiring aux cable to the wires going to the aux socket (kids kicking it out constantly) as it said low power mode. new exide ea1000 calling it seems
Fixed both front seats' runners rocking by twisting the cable - worked a charm (after an hour of swearing and having to unbolt driver's seat to get the cable back in both ways for starting to work on it in fully forward position). Still satisfied
2nd Jun 2020 8:57 pm
Boyrevel
Member Since: 25 May 2020
Location: Cwmbran
Posts: 5
Changed the old grille for a new one
Last edited by Boyrevel on 17th Jun 2020 5:29 pm. Edited 1 time in total
4th Jun 2020 12:15 pm
Burnzee56
Member Since: 03 Oct 2019
Location: Huddersfield
Posts: 59
Ventured down some tracks today, nothing too bad as by myself. Needs a wash now though.
Click image to enlarge
17th Jun 2020 5:20 pm
Boyrevel
Member Since: 25 May 2020
Location: Cwmbran
Posts: 5
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
new exide ea1000 calling it seems
