Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
Right then.....
I'm not doing this mod for one good reason.
I don't need it because just had my £12 eblag reverse cam enabled in rrmode
And needed a software update a same time
All works sooooooooooo well and the brightness is set to just over halfway and its spot on.
(Previous setting was for contrast not brightness before update.
So my car doesn't need a switch of diode as I'm leaving it in rrmode for good now......
2nd Oct 2012 11:03 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
The brightness won't stay like it
I presume it worked after screen update then G4 Gone ...but not forgotten
2nd Oct 2012 11:49 pm
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
Yes it did mate, and car drives superb now?
I think you faultmate gurus may have a few more people wanting this enablement now
3rd Oct 2012 10:59 am
Ajay(UK)
Member Since: 07 Apr 2009
Location: Arundel, West Sussex
Posts: 316
RCDtripper wrote:
Yes it did mate, and car drives superb now?
Slightly confused of Sussex
Please can you explain how a software update to the navigation screen can make the car drive better
If the software update was for the engine or transmission (which could improve the drive) how on earth can that have any effect on the screen brightness
Andy.2022MY Defender 110 D250 HSE X Dynamic, Gondwana with options!
2015 Range Rover 4.4 SDV8 Autobiography, Indus Silver, Black Pack
Gone:Disco 4 HSE Luxury, Firenze Red, Ebony/Ivory
Gone:2006 FFRR TD6 Autobiography, Black
Gone: 2013 Jaguar XKR Convertible, Italian Racing Red😢
Gone: 2008 Disco 3 HSE, Hybrid Tv + Retro-fit RSE System & DVD
Gone: 2010 FFRR TDV8 Vogue SE, RSE & DVD, Stornoway Grey
3rd Oct 2012 11:16 am
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
Bodsy !!! Help!
Ian updated the screen software yes, but he also got rid of some error codes of which I don't know what they are yet.
In the sun the screen is still a bit dim but will see how it goes before if attempt the screen fix.
But permagrin is upon my chops
3rd Oct 2012 12:03 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
I didnt reset the gearbox or do anything other than enable a few bits and update the software. It's possible that a combination of the full hard reset and the software update made all the ECU's reset somehow..... no other explanation other than RCD had been awake too make hours so perhaps the caffeine has given extra neural sensors Bodsys Brake Bible
In the sun the screen is still a bit dim but will see how it goes before if attempt the screen fix.
It will be just about ok in day light but as soon as you put your lights on the screen will be to dark.. without the mod..
Flack
3rd Oct 2012 12:11 pm
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
so you saw the bags under my eyes then
3rd Oct 2012 12:16 pm
PhyrraM
Member Since: 02 Oct 2012
Location: California
Posts: 13
I just pulled the pin to enable RRS mode on my USA spec 2006 HSE V8.
Works good. The screen brightness seems OK for now, not too sunny today. For me having access to the radio screens is nice. However, I seem to have lost the Terrain Responce and diff lock icons on the 4x4 info screen. Anybody else noticed this? I have the 2011/2012 NAV disc installed - if you think that matters.
7th Oct 2012 1:18 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Might sound daft ... But did you actually select a terrain from the dial ?
It will only show diff locks etc when you have selected a terrainG4 Gone ...but not forgotten
7th Oct 2012 8:07 am
PhyrraM
Member Since: 02 Oct 2012
Location: California
Posts: 13
Yes. Multiple times. I even tried again the next morning after the systems went to sleep.
This is the pin I pulled:
And this is the 4x4 info screen I got:
Terrain is on "mud and ruts". You can see the HDC icon works, and the steering and suspension graphics work. The air-suspension bar at the top also works fine. The Terrain Response and diff-lock icons are missing.
Is it possible I need to clear codes that might be there from when the screen was "missing" from the BUS?2006 LR3 V8 HSE
7th Oct 2012 9:33 pm
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
V8 Louis
Spot on matey, I've just done the brightness fix
I didn't use a switch as I can't see why I would want to revert back to disco mode now
(Especially now the cam is enabled)
17th Oct 2012 1:24 pm
Simonstarski
Member Since: 24 Jun 2012
Location: Cornwall
Posts: 686
Anyone fancy doing the brightness fix for me? Cutting the wire was brave in my book.. Wiring diagrams are double Dutch and Soldering is waaaaaaay beyond my abilities Narpy Grill, tinted windows, Smooth leather wheel (TLO Group buy), ACM fitted (thanks TLO), Rear door loom and Row 2 & 3 audio switch upgrade, RRS 20" wheel change, 285 Cooper LTZ's Sat Nav Mod (until I get a Faultmate upgrade), Front & Rear lamp guards. 4x4 screen now switched on - Woody32, Follow me home reverse lights - woody32, Auto release EPB - Woody32. Off Road Navigation - Woody32. Remap + EGR's switched off. Full chassis clean and Waxoyl.
17th Oct 2012 1:36 pm
Morgis
Member Since: 18 Feb 2012
Location: Kristiansand
Posts: 274
this mod, changes the illumination brightness only?
When powered on, can we use a switch to change between bright and dark without power off the ignitiion?*
Was thinking using a small relay that turns up the brightness at daytime using powerfeed from lightswitch "auto illumination"cable to dashboard.... - My 2006 D3 HSE PP
17th Oct 2012 1:40 pm
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3373
Fix was easy and I don't see the need to turn it down when lights are on, as it isn't stupidly bright it's just right
And you can still use the brightness setting to adjust to your optimal setting.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
so you saw the bags under my eyes then
