Member Since: 03 Dec 2013
Location: Bremen
Posts: 89
Hmm, just one more question:
You used squared tubes. That's allright for 90° solutions.
But in the front of all the angles are not conforming 90°.
So the surfaces are not in line.
Do you ever thought about bended sheet of steel matching the angle?
Have a look at the horizontal upper crossmember and the both vertical stands.
You will run into problems with the outer skin, wont you?
Think about it, befor primering.
9th Aug 2014 9:55 pm
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
I had a look Arlo and I think it will be ok
The sheet I am using is 0.65mm and will bend and rivet so I think it will follow the shape ok, but I will let you know
Got the primer on and top coat
went red:
then grey:
then black:
Click image to enlarge
Also test fitted the tank onto the brackets, with some rubber it will be a nice snug fit
Click image to enlarge
Click image to enlarge
07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
11th Aug 2014 8:28 pm
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Question as well for you all:
I am looking at running my gas line either under the chassis then through the floor or running it through the frame. Can I use the flexible LPG hose?? I have about 8m spare so was going to use that Or do I have to run some 10mm copper pipe?
Do you think i can run it through the frame work with grommets surrounding the holes???07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
11th Aug 2014 9:05 pm
Arlo
Member Since: 03 Dec 2013
Location: Bremen
Posts: 89
Ok then, I was too late with the angles in front. Sorry about that.
Don't try to use a hose inside the frame!
Even don't think about it!
Just use a pipe outside and everything went well!
11th Aug 2014 9:14 pm
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Ye you have confirmed my fears haha!
Thanks was thinking I will just run it through the chassis outside 07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
thats all i have done with mine no gas inside the pod at all Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
12th Aug 2014 6:16 am
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
What are you trying to do to me Simon? How on earth will I now be able to bring mine up next week and park it next to yours
Seems like zip now need to get my paint brushes out as well
Top work as usual Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
12th Aug 2014 7:39 am
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Iggy don't worry yours is at least able to carry things
Going to get the body in place today and hopefully see if all my securing points all line up and see what size bolts I am going to use to hold it all down
Well good news Iggy the cladding is arriving at the workshop today abouyt midday I will give you a ring when it is here and we will arrange a day for you to come up and cut it 07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
12th Aug 2014 9:11 am
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Well slow progress today but lifted and mounted the body on
Placed 6mm rubber between the frame and the chassis (prob a bit over kill but was cheap for a big roll)
Also got the floor completed in several sections to get a good fit
Drilled and bolted the body on with some stainless M6 bolts and it can easily be removed if it needs to be lifted off it uses the trailers original 10 points and I welded and extra 2 on to the extension giving me 12 so nice and secure
07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
12th Aug 2014 5:54 pm
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Also PVC coated galvanised steel sheeting, pre coloured, arrived today to clad it all in 07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
12th Aug 2014 5:57 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
Hmmmmmmmmmmmm cladding Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
12th Aug 2014 7:36 pm
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Well had a busy day and got quite a bit down. Finally got the O/S sorted. I am going to have three doors two 500mm wide and one 450mm wide. The 450mm one towards the front will be for storage boxes. Then the others will be a gas locker at the rear, which has space for a water heater eventually, and then in the centre will be a split door hinging down and up to create a clothes/ dressing area (for the misses, means she will hopefully look forward to using it ) The reasoning for the extra uprights are so that I can have a gap with around the doors for aesthetics. I know that means more cladding/ more work but I did not want any of the box section showing from the outside.
Up front on the angles I have squared them all up with some additional frame work to put some doors in. Up front will be two doors (one either side) that hinge down and the O/S will be the electrical cupboard with the battery in and the N/S will have the slides for the fridge with vents etc
The space at the top will be accessible from the sides. On the N/S it will be used for storing plates etc then on the O/S it will just be extra storage from the storage box section. Got some 6mm & 18mm ply and will hopefully get some stuff mocked up over the weekend if I have time.07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
14th Aug 2014 5:23 pm
sailorboi
Member Since: 26 Oct 2012
Location: Bristol
Posts: 2021
Well still plodding along
Finished all the internal welding and basically everything but annoyingly I ran out of steel and need about another 1.2m of 25x25 But I will need to order some more for the doors anyway as I used a lot of it for some partitioning internally. I was going to just use 18mm ply for the internal dividing walls but I then decided I would put a length of steel across to divide it up and use 6mm each side with a few wooden spacers in as I think it will end up lighter and once the 6mm is screwed to the box section then it will hopefully be solid
Got the spare wheel carrier mounted with clamps, I messed up a bit at I bought a disco 2 one by accident instead of a disco 1 one. O well and this one will work so it is not a total loss. Got it in position today and just clamped it up ready to drill the holes before I clad the front. But do I need to move it higher?? It sits on the front frame to take a bit of the weight as it is but would it look better slightly higher?? Thoughts please
Annoyingly where I have it now I will need to move my Jockey wheel forward by about 50mm as the handle is very tight to the spare wheel and does not spin O well just tried to be ahead of the game but it back fired
Got the floor put in for the shelf which will connect to the kitchen on one side and the storage area on the other side. Also put the runners in position to get an idea of how it would look in the fridge compartment. Really pleased with how it is looking and hopefully I can get everything I have added painted this weekend.
07 Java Black TD V6 D3, EGRs Blanked, Tow bar, Full dog guard & divider, LED Spots , DRLs, GG ATs, RLD Sump guard, RLD Spare Wheel Protector, D4 LED Rear Lights, Limo tints on boot and Midnight tint on rear windows, Kenwood screen with Garmin nav, Rear cameras, D4 Steering wheel with flappy paddles, T-max split charge system, Tree sliders, Prospeed roof rack & Ladder, Alisport fast road inter cooler,
Massey Ferguson 35x
Sankey Narrow Track Camping Trailer (Gone but to a great home)
Last edited by sailorboi on 16th Aug 2014 10:32 am. Edited 1 time in total
looking good not be long now Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
16th Aug 2014 10:16 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
But I will need to order some more for the doors anyway as I used a lot of it for some partitioning internally. I was going to just use 18mm ply for the internal dividing walls but I then decided I would put a length of steel across to divide it up and use 6mm each side with a few wooden spacers in as I think it will end up lighter and once the 6mm is screwed to the box section then it will hopefully be solid 
O well just tried to be ahead of the game but it back fired 
