This is the initial sign up for you to pledge a donation to help fund a forensic investigation into the ongoing weak oil pump casing which dealers are consistently refusing to acknowledge as a problem.
I'll work out the best way of moving this forward, but this is a place marker to gauge support.
This is an ongoing really serious issue and had Flack not replaced the oil pump casing on the link above, it surely would it have been long before another blown engine.
I have helped various people get full or partial funded replacement engines and it is about time Land Rover acknowledged the problem and issued a TSB to replace these failure parts with the 4th generation oil pump casing currently in use.
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
Last edited by Bodsy on 26th Feb 2014 8:58 pm. Edited 1 time in total
2nd Feb 2014 9:53 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
I've sent the relevant information to Douglas, I'll have a conversation with him later this week.
For this, I need to be clear on a few ground rules so people don't get upset.
I'll set up a PayPal account specifically for this. Once setup, I'll send the info out for everyone.
As I get costs etc coming in and before I take the first commitment, I'll report back to inform you.
If we get to the end of this process and there is any money left over, I would suggest that it is donated to Charity, Help for Heroes springs to mind as it is generally well supported amongst the Landrover fraternity.
Or if there is another campaign as suggested that we could build up a fund for, then that also sounds good.
Personally I'm only committing to following this action through, not to be the conduit for any possible different actions on other issues in the future.
I'll continue to update as I get further info.
5/2/14
Indicative cost of a proper analysis and report is £500 +vat. Now if a business was able to swallow up this vat, that could really help. FYI I've not committed to any action yet. I'm just giving a heads up, so the £600 is very light by the time the other collation of information is accounted for as that price is just for the metallurgical analysis and subsequent detailed report using someone that Douglas has used very successfully on many occasions.
My time is zero charge for this just in case anyone asks and I'm not linked to or being paid by anyone who I'm working with on this. Just wanted to make that bit clear before anything crops up as it's your money people. Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
Last edited by Bodsy on 5th Feb 2014 3:10 pm. Edited 2 times in total
2nd Feb 2014 9:53 am
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
Stickied for you Ian ...I've also locked the other thread at the point of your redirect 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
2nd Feb 2014 9:59 am
Alan B
Member Since: 12 Feb 2013
Location: Fife
Posts: 6528
I'm in as I have a 57 plate due for the big service this year
D3 57 xs Stornaway grey
D2 02 commercial silver gone but a great servant and won't be forgotten
but the tenner in the grand scheme of things if it funds an investigation by an independent expert bring it on...
I have some sources of expertise that I currently use who are world class materials / metallurgists & another who has finite element analysis on metal failures knowledge.
As a suggestion:
1) there been an equivalent issue with the other version of the same engine ? (Jaguar, Peugeot, Citroen & presumably Ford)
2 just what model years are affected ? (I know its '07) but are there any vehicle numbers we ought to be aware of
3) are there any on here who have lost their engines ? - & have evidence that the cause was oil pump casing failure....without this the data going back to LR won't mean anything
daft as it may seem I have kept all the parts that have failed on my D3 - just for the kind of feed back investigation (Auto gear lever quadrant, ac pipes, wheel nuts)BREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
2nd Feb 2014 10:28 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Im supporting this
Despite the fact it could end up talking myself out of a lot of work, IMHO, it is a fundamental flaw with the parts fitted, that Land Rover really should be acknowledging
Member Since: 09 Mar 2013
Location: Here and there
Posts: 590
Bl I don't think it will be a struggle to find people who have hade ngine failure as a direct result of this issue, I totally agree with your points regarding finding out if this has effected jags/pug/Citroen. Maybe TLO will be able to help with knowing exactly which vin ranges were fitted with the substandard pump casing?
Either way, a worthy cause and hopefully this will result in a decent outcome
2nd Feb 2014 10:41 am
sean 471
Member Since: 26 Apr 2011
Location: Sheffield
Posts: 2990
If I remember rightly he did post the vin numbers on here once
2nd Feb 2014 10:43 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
Power to the informed people, happy to support this investigation. I would suspect that JLR will have a bigger fighting fund though Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
2nd Feb 2014 10:47 am
waterbuoy
Member Since: 26 Oct 2013
Location: Argyll
Posts: 2919
No doubt, but at least we can try (and feel better for it!) Currently 2009 Disco 3 SE, 2013 MY D4 HSE and 2016 D4 SE
Previously:
TD5 Defender 110 CSW (230k miles)
300TDi Disco 1 (289k)
4 RR Classics (300-350k each, 2 manual, 2 auto)
110 V8 CSW (220k)
S3 109 hi cap pickup (ex RN)
S2A 88 Safari SW with lpg conversion (bloody lethal)
2nd Feb 2014 10:56 am
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
My March 07MY is currently on 102k and I shall be replacing the belts and oil pump within the next month, I'll be sure to retain the old parts for reference. GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
2nd Feb 2014 11:02 am
Bobs
Member Since: 29 Oct 2013
Location: Manchester
Posts: 2330
Mines an 06 ...
But all the help I have had since being on here its the least I can do to help others ...
I'm in D4 Front upgrade/cut back wings n things 'taking a long time but getting there'.
D4 rear upgrade - Narpys helped with that bit
Flack for problem solving and D4 Bluetooth Install/ D4 Heated Steering wheel with Flappy paddles n BBS enabling kit
Disco Mikeys work - Serviced, EGR blanking and 4x4 software upgrade, 3 flash indicators.
B.A.S - FBHIC. Uncle Rays spare wheel protector. Beanie Silver Black badges.
2nd Feb 2014 11:40 am
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Yep agree with Bobs comment and the land rover dealers I've dealt with didn't event think there was common FBH problem so no wonder land rover themselves fail to acknowledge problems though I suspect a lot of it comes down to the same old thing... MONEY
Count me in D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
..... I would suspect that JLR will have a bigger fighting fund though
Course they have & always will...their fighting fund is made entirely from profits
however they have a customer base who they can treat whichever way they want or think appropriate
this is judged in the real world of customer perception...
some makers stand over their products - some dont
those who do keep their existing customer base & attract others who learn that J/LR are more interested in being good suppliers than making a fast getaway.
this who dont fail...by losing their business & they deserve this.BREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
