Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
29th Nov 2015 2:17 pm
Jumper9895
Member Since: 10 Jun 2015
Location: Swanmore, Southampton
Posts: 226
Thanks for taking the time to post this Mikey - made activating and updating the firmware a doddle!Best Regards,
Dave.
[URL=][/URL]
2nd Dec 2015 11:59 am
Jumper9895
Member Since: 10 Jun 2015
Location: Swanmore, Southampton
Posts: 226
In live view, switching back from graph to table?
Hi guys, IID BT, not sure if this has been covered elsewhere... When using the live data view in 'table' mode and then switching to the graph view, I can't see how to switch back to table view......anyone found out how, or am I being thick as usual!Best Regards,
Dave.
[URL=][/URL]
4th Dec 2015 3:05 pm
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
iPhone ??
Agreed it is a bit hit and miss but I just tend to tap the screen somewhere in the top left and it switches back.
4th Dec 2015 3:21 pm
Chobby
Member Since: 13 Oct 2015
Location: Scotland
Posts: 204
Re: In live view, switching back from graph to table?
Jumper9895 wrote:
Hi guys, IID BT, not sure if this has been covered elsewhere... When using the live data view in 'table' mode and then switching to the graph view, I can't see how to switch back to table view......anyone found out how, or am I being thick as usual!
I had this issue the other day i did eventually get it back to numerical values when i went right out of the live values menu. At least that's what i remember.Now with: Tow bar & storage, Xenon's, Remote Timed Climate, Mood Lighting, Cubby Fridge, DRL's, Mud Flaps, 13 pin electrics, Heated Steering Wheel
Accessories: Rubber Mats, Spare Wheel Cover, LR Tyre Pressure Gauge, Warning Triangle, LED's throughout & Leather Gear Selector Top
4th Dec 2015 3:23 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Which view are you guys using? Portrait or Landscape? And which iPhone?
Member Since: 13 Oct 2015
Location: Scotland
Posts: 204
Pat, mine was landscape, I have light theme enabled, and was a 2nd gen iPad mini.
Will keep an eye out for the update Now with: Tow bar & storage, Xenon's, Remote Timed Climate, Mood Lighting, Cubby Fridge, DRL's, Mud Flaps, 13 pin electrics, Heated Steering Wheel
Accessories: Rubber Mats, Spare Wheel Cover, LR Tyre Pressure Gauge, Warning Triangle, LED's throughout & Leather Gear Selector Top
4th Dec 2015 3:55 pm
Jumper9895
Member Since: 10 Jun 2015
Location: Swanmore, Southampton
Posts: 226
PatGAPInnov wrote:
Which view are you guys using? Portrait or Landscape? And which iPhone?
In the next release, a swipe with two fingers in the same direction will do the trick.
Hi Pat, it's a I-phone 4s ( can't bring myself to upgrade and replace my Brodit phone holder!) using the latest ios.9.1
I was using it portrait, but even on landscape there was no 'back' button.
Thanks!Best Regards,
Dave.
[URL=][/URL]
4th Dec 2015 4:03 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Chobby: tried it here and it worked fine. I do however think that using the swipe will be better. I personally have issues with a Nexus 7 while everyone here is fine with it and haven't figured out why
Jumper9895: The back button is not on the graph view and this is by design. It's only available in the numeric view. We will try to see if we can add it without compromising the graph space. The 2 finger swipe will help also.http://www.gap-diagnostic.com/
4th Dec 2015 4:42 pm
alex_pescaru
Member Since: 19 Dec 2010
Location: RO
Posts: 270
In my case, but I am using Android, a simple tap in the upper part (top) of the graphs area will bring back the "buttons" and you'll be able to switch back to numeric values.
4th Dec 2015 6:05 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
PatGAPInnov wrote:
We will try to see if we can add it without compromising the graph space. The 2 finger swipe will help also.
I vote for the graph space to remain unaltered - and I may have had a hand in the back button logic!
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 13 Oct 2015
Location: Scotland
Posts: 204
PatGAPInnov wrote:
Chobby: tried it here and it worked fine. I do however think that using the swipe will be better. I personally have issues with a Nexus 7 while everyone here is fine with it and haven't figured out why
It wasn't so much that it didn't work, it was more the fact that in numeric view there was a tab for both views, but if you chose graph view there was no way to revert it, at least not that I could find. Now with: Tow bar & storage, Xenon's, Remote Timed Climate, Mood Lighting, Cubby Fridge, DRL's, Mud Flaps, 13 pin electrics, Heated Steering Wheel
Accessories: Rubber Mats, Spare Wheel Cover, LR Tyre Pressure Gauge, Warning Triangle, LED's throughout & Leather Gear Selector Top
4th Dec 2015 8:01 pm
xcentric
Member Since: 01 Apr 2015
Location: Shropshire, UK
Posts: 1081
new q's
(i) want to have a low access height for getting into places with the roof rack on - what's the recommended lower amount for access height
(ii) want to go higher in off-road mode: again, what's the recommended lift without causing alignment issues
and
(iii) can I have both, or just an offset (-ve for (i), +ve for (ii))
5th Dec 2015 1:04 am
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
I suggest having a look at our FAQ, all suspension lowering and raising details can be found there.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum