Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
So,,,,
Just tried to check a few things and change a few others with my new IID BT.
Connected, updated and activated all ok.
Read several faults and re-set ok.
Then moved on to look for clock on dash etc, can't find the setting for COD?
Found a few others and enabled/disabled them;
Beep with key in ignition (turned off)
Xenons (enabled)
Three flash indicators (enabled)
But none have worked. Re-checked and they all showing as enabled or disabled, but no 3 flash of indicator, still a chime if the key is in the ignition and you open the door and Xenons still flicker on start.
Turned off locked, opened and started and went for a short drive. But still the same, no changes.
What am I doing wrong?
28th Nov 2015 6:19 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
you need to update the BCM for 3 flash indicators and instrument pack for clock on dash
ps make sure you have extra power on the battery
28th Nov 2015 6:22 pm
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
Couldn't see clock on dash, and I did do the BCM (as far as I can tell) for 3 flash ind's.
28th Nov 2015 6:27 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
its never failed with me
cod ecu flash instrumentation then the +07 one can't remember the correct wording
ps are you working on it now
28th Nov 2015 6:29 pm
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
Ah, right do I need to update to post 07 first?
Will that be the same for the other things as well?
That section had warnings about potential for 'breaking' something
Last edited by JMack on 28th Nov 2015 6:35 pm. Edited 1 time in total
28th Nov 2015 6:33 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
3 flash update your BCM then turn on 3 flash in your ccf
28th Nov 2015 6:34 pm
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
Not working on it now, but will probably have another go tomorrow afternoon, weather permitting!
For extra battery power would another battery connected by jump-leads be ok?
28th Nov 2015 6:38 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
yes extra battery will be fine
28th Nov 2015 6:40 pm
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
Thanks Geoff.
I'll put the spare battery on the charger overnight.
28th Nov 2015 6:42 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
JMack wrote:
Ah, right do I need to update to post 07 first?
Will that be the same for the other things as well?
That section had warnings about potential for 'breaking' something
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
You might be right about off-road height, I only have the one screenshot but thought I took more than one. I did raise it to see the difference in readings. Will check again tomorrow.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Re-checked and they all showing as enabled or disabled, but no 3 flash of indicator, still a chime if the key is in the ignition and you open the door and Xenons still flicker on start.
You might be right about off-road height, I only have the one screenshot but thought I took more than one. I did raise it to see the difference in readings. Will check again tomorrow. 
