Member Since: 08 Mar 2015
Location: Gosport
Posts: 234
My experience from Bristol was that they would do software updates for free during a service if you asked them.
20th Nov 2020 9:54 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1651
Believe someone above said they were charged £50 for both TSB being applied. Not sure if this was part of a service.
Good luck getting these sorted.
Cheers
GaryGary
-------------------------------------------
Discovery 4 HSE 2016MY
20th Nov 2020 10:17 am
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 695
Ours is coming up for its next service, and I'll see if my local dealer are any better at addressing the external temp/internal heating issues...Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
20th Nov 2020 10:23 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1651
Just to manage your expectations. I'm pretty sure I'm right in saying that almost everyone on this forum that has reported trying to have the HVAC problem (cabin temperature) resolved has said that the TSB solution did not resolve it. People have also had goes at fixing themselves to no avail. There are reports on here of people saying they will sell their cars because of it.
People have reported some improvement with various settings on the heating system (auto, manual, various outlets on/off). I treat the numbers on the heating system as comfort numbers not absolute temperatures.
I wish you all the best in getting it resolved. Please let us know what happens.
CheersGary
-------------------------------------------
Discovery 4 HSE 2016MY
20th Nov 2020 10:34 pm
Disco_driver
Member Since: 22 Oct 2017
Location: Derbyshire
Posts: 98
It's annoying to think that the car I've bought has always been to main dealers for service, literally just been serviced too, and they've not applied the external temp TSB.
I recall a user on here solved it himself with a resistor, did anyone else do this?
Joe
23rd Nov 2020 9:47 am
BBDisco3
Member Since: 23 Nov 2008
Location: Cheshire
Posts: 3646
You could perhaps "fool" the display with a resistor but that doesn't necessarily mean any other possible linked functions get corrected at the same time.
Perhaps an email to LR customer service telling them you purchased this car as it had the benefit of a full LR dealer history and now disappointed to find the update hadn't been carried out and ask for it to be done now.
You would have expected LR to have taken a responsible attitude at the time and carried out a recall when we brought this problem to light, especially when it was shown to be evident on new cars.
23rd Nov 2020 10:31 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1651
Not every car has the external temperature issue, mine doesn't, so their approach is probably to apply the TSB if the customer reports a problem. Agree with what's been said, why not ask them. You have nothing to lose.
CheersGary
-------------------------------------------
Discovery 4 HSE 2016MY
23rd Nov 2020 2:48 pm
Disco_driver
Member Since: 22 Oct 2017
Location: Derbyshire
Posts: 98
I'll be emailing JLR shortly - Derbys response was £96 investigation fee plus what ever it needs to fulfil the TSB. Not the best way to be trying to get my business from future service requirements.
Joe
24th Nov 2020 1:30 pm
adm013
Member Since: 15 Nov 2015
Location: Western Isles
Posts: 25
I am also in a similar position, just bought a 1 owner Landmark that falls within the VIN number range, external temp sitting 3 degrees higher than ambient. Vehicle had a full LR service history from new and i don’t think software update has been applied! Thought it was standard practice that they plug them in for an update when in for a service.
Will need to contact the Inverness branch where services were conducted.
24th Jul 2022 4:51 pm
ClassikFan
Member Since: 02 Nov 2016
Location: Surrey
Posts: 1047
My new to me 2015 also has this issue, display over by 3degrees but also not much heat from the vents even when set high. Was there never a successful fix?Just 'cause you got the power... that don't mean you got the right.
23rd Nov 2022 6:48 pm
BBDisco3
Member Since: 23 Nov 2008
Location: Cheshire
Posts: 3646
The outside temperature display was fixed with a software update.
23rd Nov 2022 6:50 pm
ClassikFan
Member Since: 02 Nov 2016
Location: Surrey
Posts: 1047
Thanks, can the update be done with iiD tool?Just 'cause you got the power... that don't mean you got the right.
23rd Nov 2022 7:09 pm
BBDisco3
Member Since: 23 Nov 2008
Location: Cheshire
Posts: 3646
The problem was noticed on new cars at the end of 2015/ start of 2016 and eventualy after pressure from owners, LR gave dealers the software for the fix.
I'm not aware of anyone doing their own with an IID or similar.
23rd Nov 2022 7:20 pm
ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
ClassikFan wrote:
Thanks, can the update be done with iiD tool?
I wrote to GAP the other day and they've responded suggesting that an engine firmware update will resolve. I need to send ECU details across to GAP and pay them the £30 for the fast-lane-service.
I'll let you know how it goes!
23rd Nov 2022 8:36 pm
ballast
Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185
Morning all
GAP provided an ECU flash update to solve the +3 degrees temp problem on my MY2016 D4 and I flashed the ECU this morning and it appears to have worked! It was reading 9 degrees beforehand (which it really isn't 9 degrees here today!) and post flash read a much more correct 6 degrees.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
