Member Since: 13 May 2016
Location: Lagos
Posts: 22
Re: Summary
RicoF wrote:
I was looking for an answer, posted in the forum but after a good search I came across this 14 page topic... so to summarize, if you get a camera from fleabay... to get it working with RR mode you need to:
1. Take off screen
2. Dismantle screen
3. Cut off 4th wire from white plug
4. For a reversible mode, one needs to put in a toggle switch through this 4th cable
Now for this mod you get RR mode or D3 mode... (to switch between the two car needs to be off, sleep and restart)
While in RR mode, the reverse camera still does not go automatically unless it is enable via faultmate... (or any other diagnostic system I guess)
A problem is the dim screen in RR mode, but for that there is a 'tougher' mod via a diode... which is permanent as it leaves screen in RR mode...
One can also upgrade the screen software... (don't know how... so that's another search to do)...
Hope this post is of help...
How is the Camera connected to the screen? any wiring instructions?
13th May 2016 2:06 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Light sensor version 2, fully integrated in the screen unit
now it will stay in test for a few days then I'll let you know how it works
Thanks to all the guys who helped me, especially Rennos
Click image to enlarge
Click image to enlarge
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
17th May 2016 8:53 am
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
This is my simple kit 8)
one plug, 2 wires and a hole drilled in the frame
Click image to enlarge
Click image to enlarge
Click image to enlarge
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
25th May 2016 12:56 pm
wyrover
Member Since: 12 Mar 2015
Location: Wyoming
Posts: 21
Panoramix,
I'm very interested in the brightness mod you have done!! Do you have a list of parts needed and where to get them?
9th Jun 2016 12:57 am
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
I mate, you need all the parts suggested by rennos:
1 x 20-50KΩ photoresistive sensor
1 x 43KΩ resistor
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
9th Jun 2016 8:48 pm
narodk
Member Since: 09 Jun 2016
Location: Los Angeles
Posts: 15
I have this working in RR Mode, works great and the brightness control works perfect with the diode method. The one question I have and can't seem to find an answer for is, why is the video in zoom mode when I put it in reverse? When I go into diagnostic menu, I can go from Normal to Wide to Wide 2 and the picture is normal. Any help would be appreciated? Is there a way to keep this permanent on Wide 2?
10th Jun 2016 1:00 am
wyrover
Member Since: 12 Mar 2015
Location: Wyoming
Posts: 21
Panoramix wrote:
I mate, you need all the parts suggested by rennos:
1 x 20-50KΩ photoresistive sensor
1 x 43KΩ resistor
How much would this cost and can you ship to the USA?
10th Jun 2016 1:04 am
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
you have a PM
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
10th Jun 2016 10:30 am
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
narodk wrote:
I have this working in RR Mode, works great and the brightness control works perfect with the diode method. The one question I have and can't seem to find an answer for is, why is the video in zoom mode when I put it in reverse? When I go into diagnostic menu, I can go from Normal to Wide to Wide 2 and the picture is normal. Any help would be appreciated? Is there a way to keep this permanent on Wide 2?
but is not important for me, I use the camera to have a wide view and during the parking maneuver I use the PCD
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
11th Jun 2016 8:00 pm
vlonjati
Member Since: 24 Jun 2016
Location: North West
Posts: 14
This is a great thread... I am also interested on a kit. What would it take to get it here in North West USA?
Thanks
Panoramix wrote:
I mate, you need all the parts suggested by rennos:
1 x 20-50KΩ photoresistive sensor
1 x 43KΩ resistor
Member Since: 13 May 2016
Location: Lagos
Posts: 22
StevieJ4558 wrote:
WIGGS UR A GENIUS! !
I have just got home after a 550mile drive from way way down south to EDI, Im pooped but thats me away out to the garage now to go snippy snippy!!! oh and put a switch in so I can chance between the modes!!!!
Spot on!!!
I just fitted my reverse camera with my Nav screen in Range Rover Sport mode. Thanks wiggs. I wish we could discover more modes that can be done in RR mode. Unfortunately wiggs has moved on to D4 There may be no more adventure for D3.
3rd Jul 2016 1:07 pm
wyrover
Member Since: 12 Mar 2015
Location: Wyoming
Posts: 21
Panoramix,
The kit arrived and the instructions were very easy to follow. It works perfect!! Thanks for making such a great product.
7th Jul 2016 3:27 am
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Thanks for your feedback wyrover.
Credits goes to wiggs and rennos, they are the real geniuses of this mod
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
If your listening out there wiggs hopefully you can help, i have just sorted this mod and very happy just one thing if i press the hard menu button i get sat nav if i press the other i get the phone, i had the bluetooth module upgraded by bodsey last year and i get the contacts on the radio for the phone but not on the screen can this be updated, i have tried using both the radio controls and screen to make calls and both work but i would like the contacts on the screen what am i missing, also i didn't realize you can get text messages on the screen is this normal, thanks in advance. Craig
7th Jul 2016 1:04 pm
Jacksmart10
Member Since: 11 Jun 2016
Location: County Durham
Posts: 3
Hi guys, I've just done this, cut the middle wire, locked the car up, waited 5 mins, started up, and it's exactly the same, same two options, nothing has changed and everything works, what am I doing wrong? Cheers Jack. 2006 disco 3 SE
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
There may be no more adventure for D3.
