Member Since: 26 Mar 2007
Location: Athens
Posts: 90
furnitureman,
From what I have read in the forum you can only get the contacts on the screen in FFRR mode if you use the D4 module but then you also get many problems (like system freezing, etc) so it is not worth it.
Regarding text messages I do not think you can get them on the screen in FFRR mode (at least this is my experience in my car).
21st Jul 2016 11:21 am
Rennos
Member Since: 26 Mar 2007
Location: Athens
Posts: 90
Jacksmart10,
strange, it should work. Have you tried a hard reset? (just in case...)
21st Jul 2016 11:31 am
pwwalter
Member Since: 30 Jul 2016
Location: Midwest
Posts: 7
wyrover wrote:
Panoramix wrote:
I mate, you need all the parts suggested by rennos:
1 x 20-50KΩ photoresistive sensor
1 x 43KΩ resistor
How much would this cost and can you ship to the USA?
Panoramix,
You have another interested North American customer. I'm doing the mod on a NAS D3 (LR3), my camera and RCA/Farka cable have been ordered. I'll just need a dimmer sensor. Please let me know if you'd be willing to make another. I work at a Rover Dealership and will let you all know if the camera can be enabled via an SDD interface.
Thanks for the assistance!
30th Jul 2016 9:32 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Hi pwwalter,
no problem for the dimmer, I'll write you in PM
I don't how the SDD works or if that tool have "user" limitation or similar.
In my IIDTool I can found "Parking camera" in CCF, Audio System section.
You neet to set it in "Rear camera fitted"
Max
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
31st Jul 2016 7:17 am
Melv 2016
Member Since: 24 Jun 2016
Location: Liverpool
Posts: 28
I tried this an then connected it back again an got bodsy to sort it proper D3
Java black
Expo g4 rack an ladder
Roof tents limited 2.5m awning
Grabber a/t
Snorkel
Bas remap
KnN
Silicon hoses
Egr blank
D4 grill
Detango
Amk comp
Terrifirma steering guard
Love the life you live
6th Aug 2016 9:03 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Just a heads up for anyone that has done this mod, please can you check that your locking diffs work with the mod in place.
One of the facebook guys noticed that his didn't work after making the mod, but worked fine once the mod was reversed.
Can anyone else who has done this mod, check this to see if it's an unavoidable byproduct of going into FFRR mode.
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
9th Aug 2016 8:32 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
10th Aug 2016 5:00 am
Dave421
Member Since: 10 Aug 2016
Location: London
Posts: 2
Brightness fix kit
Hi are you still preparing the kits to fix the brightness issue ? If so I'm very interested. Thanks
10th Aug 2016 10:18 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
11th Aug 2016 4:34 am
Dave421
Member Since: 10 Aug 2016
Location: London
Posts: 2
Hi Yes that's it, I want to put it on my 2008 RRS I take it will work the same. How do I go about getting it ?... Thanks
11th Aug 2016 8:10 am
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
You have a PM
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
11th Aug 2016 9:51 am
pwwalter
Member Since: 30 Jul 2016
Location: Midwest
Posts: 7
Panoramix wrote:
Hi pwwalter,
no problem for the dimmer, I'll write you in PM
I don't how the SDD works or if that tool have "user" limitation or similar.
In my IIDTool I can found "Parking camera" in CCF, Audio System section.
You neet to set it in "Rear camera fitted"
Max
Max.
I'm installing the camera this evening. I'll let you know if I need the dimmer unit. We're pretty much a factory shop here, don't want to be "modding" any customer cars, that will lead to headaches.
I can live with some of the features not operating correctly in order to have a backup camera, customers on the other hand, at least the US ones, want perfection.
Not sure it would be worth the headache.
I'll let you know soon!
Cheers.
Paul
24th Aug 2016 10:38 pm
Panoramix
Member Since: 16 Dec 2008
Location: Milan Area
Posts: 3249
you have all my sympathy, customers are terrible
Discovery 3 "Tank", 2.7 TDV6 - Fully Land Rover Passion edition
LR4 "Enterprise", 5.0 V8 Petrol: now factory style but it will be like that for a long time
L322 "Centurion 3.6 TDV8", Land Rover Passion edition in progress
25th Aug 2016 8:50 am
wyrover
Member Since: 12 Mar 2015
Location: Wyoming
Posts: 21
narodk wrote:
I have this working in RR Mode, works great and the brightness control works perfect with the diode method. The one question I have and can't seem to find an answer for is, why is the video in zoom mode when I put it in reverse? When I go into diagnostic menu, I can go from Normal to Wide to Wide 2 and the picture is normal. Any help would be appreciated? Is there a way to keep this permanent on Wide 2?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
