It will be when I get it. I know I need a different cable for the front. I presumed the rear harness and camera would be the same?
19th Dec 2020 11:06 am
EIG
Member Since: 12 Feb 2009
Location: Enniskillen
Posts: 329
You said in an earlier post that you have the part numbers for the 'switch, loom and camera for the tailgate' - if you make sure these are the same as what you have, you should be okay as you don't know what a previous owner has modified!!Jim
Yeah I have the numbers. The 2010 parts are on a complete tailgate on eBay for a sensible price but bloke won’t split it. So I don’t know the part numbers fitted. Don’t really want to buy a complete tailgate if it’s the wrong one.
19th Dec 2020 12:50 pm
EIG
Member Since: 12 Feb 2009
Location: Enniskillen
Posts: 329
Someone else will probably be along to confirm if a 2010 tailgate loom is the same but I would doubt it as I'm sure it has been said on here that a FAKRA cable is not used on 6-speed versions.Jim
Member Since: 24 Dec 2020
Location: Port Elizabeth
Posts: 1
2 unused plugs in rear of disco 3 S.
alano wrote:
I would also be interested in this. I have a XS without cameras and I looked under the plastic panel where the headling reaches the rear tailgate to see if the wiring was there. There did appear to be two unused plugs on the loom but I don't know whether these were for something else. They only appeared to have two pins each though.
Does anyone know what these 2 unused plugs are for? Found them there and am interested.
So I have the loom in the roof, about to order a fakra cable for the front and found a complete tailgate with camera and loom but it’s off a 2010 model, but is the loom and switch for the tailgate the same on a 2010 and 2012 8 speed model??
Is there more than one part number for the tailgate loom and the switch?
5th Jan 2021 1:35 pm
11hwl
Member Since: 23 Feb 2021
Location: Cambridgeshire
Posts: 10
Hi all,
Probably been asked before but I can’t find any info.
Just carried out fitting of the reverse cam genuine. Just ordering the fakra cable and I was just wondering if there if a difference in the actual cable? I know the plugs are different and I need female female.
I see it’s mentioned rg174 cable but on ones fir sale I can’t see WhT cable it is just says audio/gps extension cable:
Any help would be greatly appreciated.
I'm still searching for parts. I think I've found a tailgate loom on ebay but part number is BH22-14A583-BA is this a replacement one for the earlier part number of LLR015458?
Cheers
Nick
23rd Feb 2021 1:38 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1834
M3bobby wrote:
That will be the 2014 to 2016MY then, the can bus will be needed to communicate with the SASM. I didn’t realise the later standalone camera was CAN BUS. I wonder if Famousfive is reading this?
bit of a thread revival - it appears that the CANBUS camera version was only around for MY14-MY15 and MY16 went back to the MY12-MY14 model which is much easier to install.
So bought one of those of the bay and got a working loom setup - took switched live from rear quarter panel socket and tested signal direct from camera to back of screen (with help from daughter) that worked fine
Click image to enlarge
So my problem is now I need to connect up the coax around the car as my GS had the coax connectors cut off at the factory
So not sure where I can get these Fakra pigtails - asked Martin if shop had any but not heard back yet
- just need a couple of male and female as have all the housing
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Thanks Jim, now to find the rest of the pieces!
