| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10673
  
|
probably only £250 of parts ?
plus a lot of head scratching before you removed it from the garage
|
 22nd Feb 2017 6:08 pm |
|
|
Lockey
Member Since: 13 Dec 2016
Location: Limerick
Posts: 111
 
|
£60ish for gaskets
Replacement head (yet to be confirmed but id assume about £80)
M8 x 1.0 Thread Tap £5
Other crap like brake cleaner, gasket maker etc £20ish
The big cost would have been labour! thankfully i avoided that 
|
| 23rd Feb 2017 8:50 am |
|
|
Lockey
Member Since: 13 Dec 2016
Location: Limerick
Posts: 111
|
CFB wrote:Hope you got it cheap as lot of pain there to get it going, way more patience than me 
Straight swapped it for a 1974 beetle
|
| 23rd Feb 2017 8:51 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10673
|
£165 ? 
|
| 23rd Feb 2017 12:29 pm |
|
|
Lockey
Member Since: 13 Dec 2016
Location: Limerick
Posts: 111
|
to be fair, that doesnt include getting a HPFP fitted (Which turned out not to be to problem)
|
| 23rd Feb 2017 12:34 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10673
|
Where did you get your gaskets ! 8)
|
| 23rd Feb 2017 12:37 pm |
|
|
Lockey
Member Since: 13 Dec 2016
Location: Limerick
Posts: 111
|
Paddocks for HG and Inlet/rocker cover gasket, local crowd for shaft seals and o-rings
|
| 23rd Feb 2017 12:40 pm |
|
|
DerrekL
Member Since: 01 Aug 2016
Location: Bathgate
Posts: 34
|
how did you determine that only one head had to be swapped out? 
|
| 1st Aug 2017 1:48 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8221
 
|
Well done, pleased you got there in the end and found it was what I suggested it was 7 months ago  It can when others can't,
It will when others won't,
It goes where others don't.
|
| 1st Aug 2017 9:02 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8221
|
The drivers side cam (off side) drives the near side cam, so when the chain breaks the off side is not affected, the near side cam stops, usually with a crunch. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 1st Aug 2017 9:09 pm |
|
|
DerrekL
Member Since: 01 Aug 2016
Location: Bathgate
Posts: 34
|
|
| 2nd Aug 2017 7:55 am |
|
|
DerrekL
Member Since: 01 Aug 2016
Location: Bathgate
Posts: 34
|
I'm still trying to determine what side to strip down first after this happening:
http://www.rrsport.co.uk/forum/viewtopic.php?p=531871#531871
(tensioner mount failure on the oil pump casing)
Stuck it all back together including oil pump, timing belt, tensioner, set timing using flywheel locking pin method, put all the gubbings back on then hand cranked it, all seemed OK at this point, all marks came back to meet inline, stuck timing pins back in and all seemed OK so decided to to start with key and seems as if wants to start but was told this maybe due to valves bent so not enough compression to start engine.
Thoughts? what to try next, check for bent valves, head(s) off, what side to check first?
2007 TDV6
|
| 2nd Aug 2017 8:59 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8221
|
Compression test. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 2nd Aug 2017 10:54 am |
|
|
DerrekL
Member Since: 01 Aug 2016
Location: Bathgate
Posts: 34
|
Cheers.... guide on how compression test is done, point me to previous posts maybe? I have read elsewhere compression testing is a nightmare to do.
|
| 2nd Aug 2017 10:57 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8221
|
Take injector out, replace with diesel compression testing gauge, crank engine(do not start engine), read gauge pressure, release pressure from gauge, remove gauge and move to next cylinder.
I would have thought if you've got a bent valve you would be able to tell by the sound as it is being cranked over, it would also run on as few as 3 cylinders if everything is correct on those 3 cylinders, i.e. Off side bank. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 2nd Aug 2017 11:05 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
