Member Since: 12 Feb 2013
Location: aberdeen
Posts: 214
Have you tried disconnecting the battery leave it for 10 mins and then connect it againtinted windows
led sidelights
new fuel pump
disco 3 sticker
4x4 screen unlocked ( thanks bell autos)
bell autos egr blanking kit
halo fog day running lights
ffrr sat nav hack
gvif reverse camera
clear side indicators
alisport intercooler hoses
22nd Nov 2014 6:06 am
ndoody
Member Since: 01 Dec 2014
Location: Redditch
Posts: 4
Hey guys, is there anyone who runs a garage...or know's who runs a garage in the midlands (preferably as close to Redditch as possible) who would be willing to undertake this repair?
All the 4x4/landrover "specialists" say they "wouldn't get involved with that" when it comes to reparing, they only replace at the extortionate cost...
1st Dec 2014 3:28 pm
ndoody
Member Since: 01 Dec 2014
Location: Redditch
Posts: 4
I have a garage who would be willing to give the instructions at beginning of this thread a shot - but haven't done one before. Am I safe to use emergency release so I can get car to them?
1st Dec 2014 4:53 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Usually works but my lord take note of how unbelievably hard you have to pull on the thing to. No really, that hard. No, harder than that. No trust me, even harder than that again.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 19 Jul 2014
Location: Somerset
Posts: 22
epb
Hi , been reading the posts on the epb issues, and prepping myself for the task ! Just one query how far back do you wind the brass splined piece ? At the moment mine is still working, just gives a screech now and then , especially when parking on hills .had new shoes and discs fitted 6 months ago, but I don't think (pretty sure it wasn't) the module was reset.
1st Dec 2014 9:44 pm
armalites
Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
You don't need to do that if yours is still working. You just need to strip, clean and adjust the shoes and do it before it does jam.IID PRO
MSV Extreme
Nanocom One
1st Dec 2014 10:14 pm
Dizzydog
Member Since: 19 Jul 2014
Location: Somerset
Posts: 22
epb
That's what I thought to start with, but I reckon I could be running out of travel in the module ,hence the screeching now and then, also it will be piece of mind to know its all good in there!
2nd Dec 2014 6:17 am
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Lot of work for nothing though. Like armalites said strip it ,clean and adjust before it wrecks itself and save a lot of hassle
2nd Dec 2014 7:20 am
ndoody
Member Since: 01 Dec 2014
Location: Redditch
Posts: 4
So when the garage sold us this car, they said they'd replaced some brake pads due to a light coming on and them needing doing. From what I've read, the big problem here is they don't do anything with the shoes and adjusting the EPB stuff as per bodsys brake bible - is that basically why it's jammed now?
The emergency thing was easy to pull and the car is now mobile, less a handbrake...and I'm taking it to a garage tomorrow. I should ask them to follow this guide for unjamming, and also look to replacing / refitting / clean / calibrating everything around the epb and the brake shoes right...as the most probable underlying cause?
5th Dec 2014 2:56 pm
ndoody
Member Since: 01 Dec 2014
Location: Redditch
Posts: 4
Is there anything else not mentioned in this guide that the garage will have to do to "re-attach" anything now that I've pulled the emergency release?
5th Dec 2014 2:58 pm
Nodge68
Member Since: 05 Sep 2014
Location: Newquay
Posts: 1014
Re: epb
Dizzydog wrote:
That's what I thought to start with, but I reckon I could be running out of travel in the module ,hence the screeching now and then, also it will be piece of mind to know its all good in there!
My EPB screeched on occasion. I stripped, cleaned and properly adjusted the shoes. Job done, no more screeching. I was surprised to find that when the last set of new shoes were fitted, the adjusters were left fully wound in. It's a wonder the EPB worked at all. Now the EPB motor runs for 1/2 a second instead of the 2 seconds it had been running for, trying to take up all the slack.Freelander SE 2005 Auto.
D3 TDV6. Gone.
5th Dec 2014 6:50 pm
Jurgenrens
Member Since: 25 Nov 2014
Location: 3590 Diepenbeek
Posts: 20
Disco_Mikey can you please post another link off the video?
No need anymore for the video!
I have fixed my epb whit this tread
Thanks to Disco-Mickey
20th Dec 2014 7:40 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1826
EPB rebuild cometh
Made my first mishtake by cleaning the car yesterday car and today SWMBO stranded after school run when EPB siezed
I drove to her and after a quick tug (at the emergency release cord) and she was on her way again.
So in the meantime I've taped the EPB switch so I'm not tempted to use it but as a man with limited garage skills (and tools) do you think this is a task for my local (trusted) independent ... or should I, in true disco3.co.uk spirit, have a go myself.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
car yesterday car and today SWMBO stranded after school run when EPB siezed 
(at the emergency release cord) and she was on her way again.
